Z603 Automatic Opening Force Gauge
The “Enhanced” Opening Force Gauge from Torus Measurement Systems builds on the success of the standard model used by leading end makers. By monitoring critical manufacturing parameters over time and relating the press performance to the change in the ends opening signature, the manufacturing process capability can be observed. This trend monitoring is extremely beneficial to the process engineer, in predicting potential out-of-spec score residual and other critical features. By sampling ends from the production line, the Opening Force Gauge can monitor tooling wear in real-time and provide significant savings in both labour and scrap.
Benefits to your business
Measurement Features:
Feature
Accuracy
>
Quick-change tooling design
Pop and Tear Force/Angle
Dead Weight: +/- 0.2lbf (0.09kgf)
> Automatic tooling adjustment (Multi Axis Control) > Tab strength with automatic tab rotation > Programmable pressurization > Optional features available: Vent and Missle (Pass/ Fail), Score Aperture Opening (Tuck Under), RPT Capability
Tab Strength Force/Angle
Tab Differential
Partial Opening Force/Angle
Vertical Drop Angle
ELECTRICITY 100-240 Volts / 50-60 Hz
Programmable Pressurization
0-95 PSI (6.5 bar)
Load Capacity
200 ends
COMPRESSED AIR 7 bar / 101.5 PSI
Technical Specification: Component Range Typical Range Size Range
WEIGHT 500kg Max
200-300 diameters (tooling change required for different ends)
Click here to view the video
DIMENSIONS (W) 1955mm x (H) 1595mm (D) 1004mm
End Type
SOT / RPT
x
x
Pull Load Range
0-25lbf (11.3kgf) with overload protection
x
67.
Made with FlippingBook Online newsletter maker