Operations training
High Voltage Standard / V0 - DRAFT 2025-03-21
5.3 Aims and Objectives Training in accordance with this High Voltage Standard will enable participants to support work related to high voltage equipment and systems as per the specific module focus area and detailed topics within. High Voltage Operations This training intends to prepare workers to operate and make safe High Voltage equipment and systems, under a documented safe system of work. High Voltage Cable Pulling This training focusses on the effective performance of High Voltage Cable Pulling operations, under a documented safe system of work. The goal of training is to increase the quality of HV cable pulling operations, while supporting and promoting safe working practices.
5.4 Duration of the High Voltage Standard Modules
The total contact time for completing each module within the High Voltage Standard is given in the module timetables and summarised in table 5.4.1 below.
The training provider must not exceed the time per day given in table 5.4.2 below.
Modules
Duration
High Voltage Operations
26 hours 30 minutes
High Voltage Cable Pulling
7 hours 25 minutes
Table 5.4.1 - Duration of the GWO HV Modules
Maximum Duration Per Day
Contact time
8 hours
Total training day
10 days
Table 5.4.2 - Maximum durations for training days
Contact time includes delivery of course lesson content, practical exercises and activities directly related to these.
Note
The total training day includes contact time, meals and breaks and travel between training sites (where applicable).
Global Wind Organisation / www.globalwindsafety.org
9 / 114
Made with FlippingBook flipbook maker