MDF wood can be done or decorated with our wood-burning gel Torch Paste. Please see the Torch Paste video on JG Electronics FB or YouTube to learn how to do Torch paste on wood.
FOR SUBLIMATING ON THE MDF WOOD, YOU WILL NEED:
Heat Press + Heat Tape
Sublimation Paper
Sublimation Printer
2.5 Silicone/Rubber Pad
HOW TO PREPARE AND PRESS? 1. Remove the Teflon sheet from the press, you will press directly on the rubber of the press.
2. Mirror your design. Print with sublimation ink on sublimation paper.
3. Cut out your artwork so that you leave a white unprinted area at the top and bottom, which you can fold around the wood. Don ’ t cut away all white areas of the paper.
4. Let the print face the printable side of the MDF product.
OPTIONAL: If you see any black dirt marks on your MDF due to laser cutting, you can lightly sand them down to remove the marks. I find this method better than attempting to use a cloth, which only smudges the black marks. Sanding will also smooth out the surface, providing you with a better print.
Printable Side
Non-Printable Side
Made with FlippingBook - professional solution for displaying marketing and sales documents online