KINTEK

CONE TOLERANCE

L1

L2

DIN 69893 A+C

B (only type A+C)

HSK

L1

L2

DA

DB

24 +0.005 +0,007 30 +0.005 +0,007 24 +0.005 +0.007 38 +0.006 +0.009 30 +0.005 +0.007 48 +0.007 +0.011 38 +0.006 +0.009 75 +0.009 +0.015 60 +0.008 +0.013 95 +0.008 +0.013

23,27 +0.003 +0,005 29,05 +0.003 +0,005 23,27 +0.003 +0,005 36,9 +0.003 +0.006 29,05 +0.003 +0,005 46,53 +0.003 +0.007 36,9 +0.003 +0.006 72,6 +0.003 +0.009 58,1 +0.003 +0.008 91,9 +0.003 +0.008

32 A+C

3,2

7,3

7.05 +/- 0.04

40 A+C+E

4

9,5

8.05 +/- 0.04

40 B+D

3,2

7,3

-

50 A+C+E

5

11

10.54 +/- 0.04

50 B+D+F

4

9,5

-

63 A+C+E

6,3

14,7

12.54 +/- 0.04

63 B+D+F

5

11

-

100 A+C

10

24

20.02 +/- 0.04

100 B+D

8

19

-

125 A+C

12,5

30,5

25,02 +/- 0,04

TECHNICAL DATA KINTEK CHUCKS WITH ISO FITTING

All KINTEK toolholders are manufactured according to DIN norms. (these norms provide the same classes of tolerance for the attachment DIN69893 A+C, B+D, E, F) COLLET CHUCK’S RUNOUT ACCURACY The norm DIN 69882-6 permits a runout error of 0,005 mm. for DIN6499/ISO15488 collet chucks. SHELL END MILL ADAPTOR’S RUNOUT ACCURACY Our shell end mill adaptors meet the requirements of the norm DIN 69882-2, which prescribes for diameters Ø 16,22,27,32 a runout accuracy of 0,01 WELDON END MILL HOLDER’S RUNOUT ACCURACY According to norm DIN 69882-4 Weldon end mill holders have to meet the following requirements:

BORE: H5 RUNOUT ACCURACY: 0.005.

CONSTRUCTIVE FEATURES • Manufactured with casehardening Steel • Casehardened with depth 0,4 - 0,5 mm • Hardened-Tempered • Hardness HRC 58+-2, Strength 800-1000 N/mm 2 • Black oxided • Internal and external grinding finish of the cone

• Grinding finish on the front side and on the thread of collet nuts • Tested 100% with certified measuring instruments and supplied with balancing certificate on request

HSK A+C CHUCKS DIN 69893-1

35

Made with FlippingBook - Online Brochure Maker