CONE TOLERANCE
L1
L2
DIN 69893 E
B (only tipe A+C)
HSK
L1
L2
DA
DB
19 +0,005 +0,007 24 +0.005 +0.007 30 +0.005 +0.007 24 +0.005 +0.007 38 +0.006 +0.009 30 +0.005 +0.007 48 +0.007 +0.011 38 +0.006 +0.009 75 +0.009 +0.015 60 +0.008 +0.013
18,15 +0,003 +0,005 23,27 +0.003 +0.005 29,05 +0.003 +0.005 23,27 +0.003 +0.005 36,9 +0.003 +0.006 29,05 +0.003 +0.005 46,53 +0.003 +0.007 39,9 +0.003 +0.006 72,6 +0.003 +0.009 58,1 +0.003 +0.008
25 A+C+E
2,5
8,5
6.05 +/- 0.04
32 A+C
3,2
7,03
7.05 +/- 0.04
40 A+C+E
4
9,05
8.05 +/- 0.04
40 B+D
3,2
7,03
-
50 A+C+E
5
11
10.54 +/- 0.04
50 B+D+F
4
9,05
-
63 A+C+E
6,3
14,07
12.54 +/- 0.04
63 B+D+F
5
11
-
100 A+C
10
24
20.02 +/- 0.04
100 B+D
8
19
-
TECHNICAL DATA KINTEK CHUCKS WITH ISO FITTING
BORE: H5 RUNOUT ACCURACY: 0.005. CONSTRUCTIVE FEATURES
All KINTEK toolholders are manufactured according to DIN norms. (these norms provide the same classes of tolerance for the attachment DIN69893 A+C, B+D, E, F) COLLET CHUCK RUNOUT ACCURACY The norm DIN 69882-6 permits a runout error of 0,005 mm. for DIN6499/ISO15488 collet chucks. SHELL END MILL ADAPTOR RUNOUT ACCURACY Our shell end mill adaptors meet the requirements of the norm DIN 69882-2, which prescribes for diameters Ø 16,22,27,32 a runout accuracy of 0,01. WELDON END MILL HOLDER RUNOUT ACCURACY According to norm DIN 69882-4 Weldon end mill holders have to meet the following requirements:
• Manufactured with Casehardening Steel. • Casehardened with depth 0,4 - 0,5 mm • Hardened-Tempered • Hardness HRC 58+-2, Strength 800-1000 N/mm 2 • Black oxided • Thread of collet nuts, internal and external diameters are completely grinding finished • Tested 100% with certified measuring instruments
MANDRINI HSK E DIN 69893-5
60
Made with FlippingBook - Online Brochure Maker