POSITIONING CONTROL OF THE TOOL CHANGER ARM
TC/BT
HSK
CAPTO
COD.
CONE
KIT.PRUEFD-TC40 KIT.PRUEFD-TC50 KIT.PRUEFD-BT30 KIT.PRUEFD-BT40 KIT.PRUEFD-BT50 KIT.PRUEFD-HSK40 KIT.PRUEFD-HSK63 KIT.PRUEFD-H100
TC40 TC50 BT30 BT40 BT50
1
HSK40A HSK63A HSK100A
2
KIT.PRUEFD-C4 KIT.PRUEFD-C5 KIT.PRUEFD-C6 KIT.PRUEFD-C8
C40 C50 C63 C80
1. After assembling the usual pull stud, insert the cone into the spindle manually 2. Set up the flange into the tool changer arm and go closer to the spindle 3. After positioning, try to insert the double-diameter control pin between the two pieces. Adjust the arm accordingly until you get the perfect coaxiality so that the control bar enters the flange and the cone holes with no interference
3
KIT CONTROL PIN+POSITIONING CONTROL OF THE TOOL CHANGER ARM
COD.
CONE
PIN
KIT-TC40-CP-PR KIT-BT40-CP-PR KIT-HSK63-CP-PR KIT-C63-CP-PR
TC40 BT40
TC40H300D40BC BT40H300D40BC HSK63AH346D40BC
HSK63
C63
C63H346D40BC
CONTROL PINS
742
Made with FlippingBook - Online Brochure Maker