Interchangeable Cirular Arc Finishing End Mills for Multi-Axis Machining IMP..-Q138 / Q138FX / Q138SX
Specially defined profile, reduce cycle time and improved surface finish. Taper form with three tangential radius, offered in a variety angles, provide maximun performance and optimal clearance angle for any workpiece. 4 Flute geometry specifically designed for semi- finishing and finishing in stainless steel, high temperature alloys, and other ferrous materials. Bright w/o coating with sharp cutting edge for Aluminium. AlCrN coating for high hardness and best lubricating effect, for Steel, Stainless Steel etc. AlTiXZrN coating for high lubricating effect, anti- stick, for Nickle Alloys, High Tempreature Alloys, Stainless Steel and Titianium etc.
R3
R2
A R1
Lc
P H M K N S
L1
H
MG Carbide
Uncoated Bright
AlCrN FX
AlTiXN+ZrN SX
30°
8°
4
R1 0.015 -0.015
R2 0.015 -0.015
R3 0.015 -0.015
Uncoated Bright
AlCrN FX
AlTiXN+ZrN SX
A A°
Lc mm
L1 mm
D1 mm
Code No.
IMP10-Q138FX033009A30 IMP10-Q138FX067509A30 IMP12-Q138FX040010A30 IMP12-Q138FX090010A30 IMP16-Q138FX050014A30 IMP16-Q138FX112514A30 IMP20-Q138FX060017A30 IMP20-Q138FX135017A30
30 30 30 30 30 30 30 30
1.2 300 2.5 8.78 16 1.2 675 2.5 8.78 16
9.7 9.7
● ● ● ● ● ● ● ●
○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○
1.5 400 3 1.5 900 3
10.48 19 11.7 10.48 19 11.7 13.97 24 15.5 13.97 24 15.5 17.46 30 19.5 17.46 30 19.5
2 2
500 4 1125 4
2.5 600 5 2.5 1350 5
103
Made with FlippingBook - Online Brochure Maker