S450 / S450-3.0 / S450-4.0 Recommended Milling Conditions
Side Milling
Slotting
GR.10 Aluminium
GR.12 Plastics
GR.10 Aluminium
Work Material
Work Material
400
400
Vc m/min
400
Vc m/min
RPM (min-1)
Feed (mm/min)
RPM (min-1)
Feed (mm/min)
RPM (min-1)
Feed (mm/min)
Code No.
Dc
Code No.
Dc
S450-1
1
63,000
1,320 1,050 1,230 1,260 1,340 1,400 1,480 1,640 1,720 1,940 2,100 2,100 1,800
63,000 50,000 45,000 42,000 40,000 29,500 24,000 20,000 15,200 12,000 10,000
1,580 1,200 1,470 1,500 1,600 1,680 1,770 1,970 2,060 2,330 2,520 2,520 2,160
S450-1
1
63,000
1,890 1,500 1,755 1,800 1,800 2,100 2,100 2,300 2,500 2,850 3,000 3,000 2,500
S450-1.5
1.5 50,000
S450-1.5
1.5 50,000
S450-2
2
45,000
S450-2
2
45,000
S450-2.5 S450-3 S450-4 S450-5 S450-6 S450-8 S450-10 S450-12 S450-16 S450-20
2.5 42,000
S450-2.5 S450-3 S450-4 S450-5 S450-6 S450-8 S450-10 S450-12 S450-16 S450-20
2.5 42,000
3 4 5 6 8
40,000 29,500 24,000 20,000 15,200 12,000 10,000
3 4 5 6 8
40,000 29,500 24,000 20,000 15,200 12,000 10,000
10 12 16 20
10 12 16 20
7,600 6,000
7,600 6,000
7,600 6,000
ap:1.5D
Depth of Cut （ mm ）
Depth of Cut （ mm ）
ap:0.5D
ap:0.5D
ae:0.1D
1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid.
3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
24
Made with FlippingBook - Online Brochure Maker