S250-3.0ZX / S250-4.0ZX Recommended Milling Conditions
Side Milling
Slotting
GR.10 Aluminium
GR.10 Aluminium
Work Material
Work Material
400
400
Vc m/min
Vc m/min
RPM (min-1)
Feed (mm/min)
RPM (min-1)
Feed (mm/min)
Code No.
Dc
Code No.
Dc
S250-3.0-3 S250-3.0-4 S250-3.0-5 S250-3.0-6 S250-3.0-7 S250-3.0-8 S250-3.0-9 S250-3.0-10 S250-3.0-12 S250-3.0-16 S250-3.0-20
3 4 5 6 7 8 9
26,500 19,900 16,000 13,500 11,750 10,000
1,600 2,000 1,550 2,300 2,350 2,400 2,400 2,400 2,200 2,100 2,000
S250-3.0-3 S250-3.0-4 S250-3.0-5 S250-3.0-6 S250-3.0-7 S250-3.0-8 S250-3.0-9 S250-3.0-10 S250-3.0-12 S250-3.0-16 S250-3.0-20
3 4 5 6 7 8 9
26,500 19,900 16,000 13,500 11,750 10,000
1,440 1,800 1,400 2,000 2,080 2,160 2,180 2,200 2,000 1,900 1,700
9,000 8,000 6,600 5,000 4,000
9,000 8,000 6,600 5,000 4,000
10 12 16 20
10 12 16 20
ap:1.5D
Depth of Cut （ mm ）
Depth of Cut （ mm ）
ap:0.5D
ae:0.1D
1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid.
3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
28
Made with FlippingBook - Online Brochure Maker