OSL

S208F / S210F Recommended Milling Conditions

General processing

GR.2 Low-alloyed Steel ( ~24HRC )

GR.3 Hi-alloyed Steel ( ~30HRC )

GR.4 Hardened Steel ( 30~38HRC )

GR.5 Hardened Steel ( 38~48HRC )

GR.1 Carbon Steel

GR.8 Stainless Steel

GR.9 Cast Iron

GR.11 Copper

Work Material

100

100

65

65

55

65

100

100

Vc m/min

RPM (min-1)

Feed (mm/min)

RPM (min-1)

Feed (mm/min)

RPM (min-1)

Feed (mm/min)

RPM (min-1)

Feed (mm/min)

RPM (min-1)

Feed (mm/min)

RPM (min-1)

Feed (mm/min)

RPM (min-1)

Feed (mm/min)

RPM (min-1)

Feed (mm/min)

Code No.

Dc

S208F-R0.5 S208F-R0.75

1 31,500 564 31,500 564 25,000 412 25,000 412 22,000 296 25,000 412 31,500 564 32,000 700 1.526,250 578 26,250 578 20,860 418 20,860 418 14,800 302 20,860 418 26,250 578 25,500 715 2 21,000 582 21,000 582 16,720 425 16,720 425 11,000 310 16,720 425 21,000 582 19,000 730 2.515,750 596 15,750 596 12,580 430 12,580 430 8,900 316 12,580 430 15,750 596 12,700 745 3 10,500 620 10,500 620 8,450 435 8,450 435 7,400 322 8,450 435 10,500 620 12,500 760 4 9,250 630 9,250 630 6,350 442 6,350 442 5,550 342 6,350 442 9,250 630 9,500 765 5 7,950 640 7,950 640 5,095 447 5,095 447 4,460 377 5,095 447 7,950 640 7,650 775 6 5,300 670 5,300 670 4,200 465 4,200 465 3,700 390 4,200 465 5,300 670 6,300 800 8 3,950 790 3,950 790 3,150 555 3,150 555 2,750 455 3,150 555 3,950 790 4,750 950 10 3,150 745 3,150 745 2,500 525 2,500 525 2,200 430 2,500 525 3,150 745 3,800 890 12 2,650 700 2,650 700 2,100 490 2,100 490 1,850 430 2,100 490 2,650 700 3,170 840 16 1,990 525 1,990 525 1,580 370 1,580 370 1,390 325 1,580 370 1,990 525 2,400 630 20 1,590 420 1,590 420 1,260 290 1,260 290 1,110 260 1,260 290 1,590 420 1,900 500

S208F-R1

S208F-R1.25 S208F-R1.5 S208F-R2 S208F-R2.5 S208F-R3 S208F-R4 S208F-R5 S208F-R6 S208F-R8 S208F-R10

ap:0.1D ap:0.1D ap:0.1D ap:0.1D ap:0.1D ap:0.1D ap:0.1D ap:0.1D

Depth of Cut ( mm )

ae:0.2D ae:0.2D ae:0.2D ae:0.2D ae:0.1D ae:0.1D ae:0.2D ae:0.2D

General processing

GR.2 Low-alloyed Steel ( ~24HRC )

GR.3 Hi-alloyed Steel ( ~30HRC )

GR.4 Hardened Steel ( 30~38HRC )

GR.5 Hardened Steel ( 38~48HRC )

GR.1 Carbon Steel

GR.8 Stainless Steel

GR.9 Cast Iron

GR.11 Copper

Work Material

100

100

65

65

55

65

100

100

Vc m/min

RPM (min-1)

Feed (mm/min)

RPM (min-1)

Feed (mm/min)

RPM (min-1)

Feed (mm/min)

RPM (min-1)

Feed (mm/min)

RPM (min-1)

Feed (mm/min)

RPM (min-1)

Feed (mm/min)

RPM (min-1)

Feed (mm/min)

RPM (min-1)

Feed (mm/min)

Code No.

Dc

S210F-R0.5 S210F-R0.75

1 25,200 480 25,200 480 20,000 320 20,000 320 17,600 225 20,000 320 25,200 480 25,600 560 1.516,640 480 16,640 480 13,600 320 13,600 320 11,840 225 13,600 320 16,640 480 20,400 560 2 12,400 480 12,400 480 10,000 320 10,000 320 8,800 230 10,000 320 12,400 480 15,200 560 2.512,400 480 12,400 480 8,160 320 8,160 320 7,120 230 8,160 320 12,400 480 10,160 560 3 8,400 500 8,400 500 6,760 325 6,760 325 5,920 230 6,760 325 8,400 500 10,000 608 4 6,360 500 6,360 500 5,080 355 5,080 355 4,440 300 5,080 355 6,360 500 7,600 608 5 6,360 500 6,360 500 4,070 355 4,070 355 3,568 300 4,070 355 6,360 500 6,120 608 6 4,240 535 4,240 535 3,360 370 3,360 370 2,960 310 3,360 370 4,240 535 5,040 640 8 3,160 630 3,160 630 2,520 445 2,520 445 2,200 360 2,520 445 3,160 630 3,800 760 10 2,520 600 2,520 600 2,000 420 2,000 420 1,760 340 2,000 420 2,520 600 3,040 710 12 2,120 560 2,120 560 1,680 390 1,680 390 1,480 340 1,680 390 2,120 560 2,530 670 16 1,590 420 1,590 420 1,260 295 1,260 295 1,110 260 1,260 295 1,590 420 1,920 500

S210F-R1

S210F-R1.25 S210F-R1.5 S210F-R2 S210F-R2.5 S210F-R3 S210F-R4 S210F-R5 S210F-R6 S210F-R8 S210F-R10

20 1,270 335 1,270 335 1,000 230 1,000 230

888

200 1,000 230 1,270 335 1,520 400

ap:0.1D ap:0.1D ap:0.1D ap:0.1D ap:0.1D ap:0.1D ap:0.1D ap:0.1D

Depth of Cut ( mm )

ae:0.2D ae:0.2D ae:0.2D ae:0.2D ae:0.1D ae:0.1D ae:0.2D ae:0.2D

1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid.

3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.

62

Made with FlippingBook - Online Brochure Maker