G234DC / G244DC
Recommended Milling Conditions
Roughing
GR.14 Graphite
Work Material
RPM (min-1)
Feed (mm/min)
AP （ mm ）
Code No.
Dc
G234DC/G244DC-R2 G234DC/G244DC-R3 G234DC/G244DC-R4 G234DC/G244DC-R5 G234DC/G244DC-R6
4 6 8
19000~11000 19000~9600 15200~7200 11875~5700
2900~1800 4000~2100 3700~1800 2750~1350 2400~1100
0.40 0.60 0.80 1.00 1.20
10 12
9975~4800
Finishing
GR.14 Graphite
Work Material
RPM (min-1)
Feed (mm/min)
AP （ mm ）
Code No.
Dc
G234DC/G244DC-R2 G234DC/G244DC-R3 G234DC/G244DC-R4 G234DC/G244DC-R5 G234DC/G244DC-R6
4 6 8
19000~11000 19000~9600 15200~7200 11875~5700
1900~1200 2800~1400 2400~1200 1800~900 1600~750
0.12 0.18 0.22 0.25 0.30
10 12
9975~4800
※ Notice: G244DC is Long Length series End Mills. Please adjust the parameter according. 1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid. 3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
170
Made with FlippingBook - Online Brochure Maker