G298DC
Recommended Milling Conditions
Ordinary cutting
GR.14 Graphite
Work Material
RPM (min-1)
Feed (mm/min)
AP （ mm ）
AE （ mm ）
Code No.
Dc
G298DC-4 G298DC-6 G298DC-8 G298DC-10 G298DC-12
4 6 8
12000~8000 12000~7000 10000~7000 8000~4000 6000~3000
2450~1650 3050~1800 2700~1900 2200~1100 1650~815
0.08 0.20 0.20 0.20 0.20
1.00 2.00 2.80 4.40 4.40
10 12
1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid.
3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
174
Made with FlippingBook - Online Brochure Maker