High Performance Drills D421TX
Code No. D421TX-Dc
AlTiSiN TX
MG Carbide
AlTiSiN D421TX
AlTiSiN D421TX
Lc mm
L mm
d h6
Lc mm
L mm
d h6
Dc h7
Dc h7
Dc
1 6 50 3 1.1 6 50 3 1.2 6 50 3 1.3 6 50 3 1.4 6 50 3 1.5 6 50 3 1.6 8 50 3 1.7 8 50 3 1.8 8 50 3 1.9 8 50 3 2 8 50 3 2.1 10 62 3 2.2 10 62 3 2.3 10 62 3 2.4 10 62 3 2.5 10 62 3 2.6 13 62 3 2.7 13 62 3 2.8 13 62 3 2.9 13 62 3 3 13 62 3 3.1 19 66 4 3.2 19 66 4 3.3 19 66 4 3.4 19 66 4 3.5 19 66 4 3.6 21 66 4 3.7 21 66 4 3.8 21 66 4 3.9 21 66 4 4 21 66 4 4.1 23 66 5 4.2 23 66 5 4.3 23 66 5 4.4 23 66 5 4.5 23 66 5 4.6 25 66 5 4.7 25 66 5 4.8 25 66 5 4.9 25 66 5 5 25 66 5 5.1 28 66 6 5.2 28 66 6 5.3 28 66 6 5.4 28 66 6 5.5 28 66 6 5.6 28 66 6 5.7 28 66 6 5.8 28 66 6 5.9 28 66 6 6 28 66 6 6.1 34 79 7 6.2 34 79 7 6.3 34 79 7 6.4 34 79 7 6.5 34 79 7 6.6 34 79 7 6.7 34 79 7 6.8 34 79 7 6.9 34 79 7
7 34 79 7 7.1 41 79 8 7.2 41 79 8 7.3 41 79 8 7.4 41 79 8 7.5 41 79 8 7.6 41 79 8 7.7 41 79 8 7.8 41 79 8 7.9 41 79 8 8 41 79 8 8.1 47 89 9 8.2 47 89 9 8.3 47 89 9 8.4 47 89 9 8.5 47 89 9 8.6 47 89 9 8.7 47 89 9 8.8 47 89 9 8.9 47 89 9 9 47 89 9 9.1 47 89 10 9.2 47 89 10 9.3 47 89 10 9.4 47 89 10 9.5 47 89 10 9.6 47 89 10 9.7 47 89 10 9.8 47 89 10 9.9 47 89 10 10 47 89 10 10.1 55 102 11 10.2 55 102 11 10.3 55 102 11 10.4 55 102 11 10.5 55 102 11 10.6 55 102 11 10.7 55 102 11 10.8 55 102 11 10.9 55 102 11 11 55 102 11 11.1 55 102 12 11.2 55 102 12 11.3 55 102 12 11.4 55 102 12 11.5 55 102 12 11.6 55 102 12 11.7 55 102 12 11.8 55 102 12 11.9 55 102 12 12 55 102 12 12.5 60 107 13 13 60 107 13 13.5 60 107 14 14 60 107 14 14.5 65 115 15 15 65 115 15 15.5 65 115 16 16 65 115 16
R
3XD
2
140°
Work Material P H M K N S
P Steel
H <38HRC
Hardened Steel
d
H <48HRC
Hardened Steel
M Stainless Steel
K Cast Iron
S Titanium
S Nickel
S High Temp Alloys
Feature of product: JIS 3XD Drills 140° S-shape drill tip design to reduce axial force. Design with groove shape to provide higher chip removal rates. Good wear resistance and lubrication with Nano multilayer coating. Application for drilling with Steels which is below HRC48, Cast Iron, Aluminium…etc. Suitable for drilling with 3XD depth.
193
Made with FlippingBook - Online Brochure Maker