End Mills With Corner Radius For Difficult To Cut Materials F652SX
Designed with two variable helix geometry and two unequal flutes. Sharp cutting edge is good for cutting toughness materials. Designed with high removal cutting geometry. Improved cutting edge strength with corner radius. Applicable for profile surface machining. Good wear resistance and lubricating effect with Nano multilayer coating.
R
Lc
L1
L
Stainless Titainlum Nickel
N
VHM Carbide
AlTiXN+ZrN SX
38°~
8°
M S
M S
Sharp cutting edge is suitable for cutting stainless steel, titanium, nickel and high temp alloys… etc. Application for roughing and finishing cutting in different materials.
DIN 6527 Standard Length Dc 0 -0.02 R ±0.01 Lc mm
L mm
d h5
L1 mm
D1 mm
F652SX HA
F652SX HB
3 4 5 6 8
R0.2 R0.2 R0.2 R0.2 R0.2 R0.2 R0.2 R0.2 R0.2 R0.5 R0.5 R0.5 R0.5 R0.5 R0.5 R0.5 R0.5 R0.5
8
57 57 57 57 63 72 83 92
6 6 6 6 8
14 16 18 20 26 31 37 43 53 14 16 18 20 26 31 37 43 53 20 26 31 37 43 53 20 26 31 37 43 53 37 43 53
2.8 3.8 4.8 5.8 7.7 9.7
11 13 13 19 22 26 32 38
10 12 16 20
10 12 16 20
11.6 15.5 19.5
104
3 4 5 6 8
8
57 57 57 57 63 72 83 92
6 6 6 6 8
2.8 3.8 4.8 5.8 7.7 9.7
11 13 13 19 22 26 32 38 13 19 22 26 32 38 13 19 22 26 32 38 26 32 38
10 12 16 20
10 12 16 20
11.6 15.5 19.5
104
6 8
R1 R1 R1 R1 R1 R1 R2 R2 R2 R2 R2 R2 R3 R3 R3
57 63 72 83 92
6 8
5.8 7.7 9.7
10 12 16 20
10 12 16 20
11.6 15.5 19.5
104
6 8
57 63 72 83 92
6 8
5.8 7.7 9.7
10 12 16 20 12 16 20
10 12 16 20 12 16 20
11.6 15.5 19.5 11.6 15.5 19.5
104
83 92
104
231
Made with FlippingBook - Online Brochure Maker