Cutting Conditions
F652SX
Dc
ae
Dc
Dc
Dc
ae
ae=0.25xDc ae
ae=0.02xDc ae
ae=Dc
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
Stainless Steel Materials
80
0.003xDc
90
0.004xDc
110
0.003xDc
130
0.003xDc
GR8-1 Ferritic 、 Martensitic
70
0.003xDc
80
0.003xDc
90
0.003xDc
100
0.003xDc
GR8-2 Austenitic
M
40
0.002xDc
50
0.003xDc
60
0.002xDc
70
0.002xDc
GR8-3 Austenitic-ferritic
Austenitic-ferritic Heat-resistant
30
0.002xDc
40
0.003xDc
40
0.002xDc
50
0.002xDc
GR8-4
Cast Lron Materials
35
0.002xDc
40
0.002xDc
40
0.002xDc
45
0.002xDc
GR15 Titanium
Nickel Materials
30
0.002xDc
35
0.002xDc
35
0.002xDc
40
0.002xDc
GR16-1 Nickel
30
0.002xDc
35
0.002xDc
35
0.002xDc
40
0.002xDc
S
GR16-2 cobalt-base alloys
30
0.002xDc
35
0.002xDc
35
0.002xDc
40
0.002xDc
GR16-3Iron-based alloy
Heat-resistant Steel Materials
30
0.002xDc
35
0.002xDc
35
0.002xDc
40
0.002xDc
GR17 Heat-resistant Steel
All cutting data serve for orientation only and should be adapted individually to the technical conditions on location 1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid. 3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
232
Made with FlippingBook - Online Brochure Maker