Cutting Conditions
F607ZX
Dc
Dc
Dc
Dc
ae=0.02xDc ae
ae=0.4xDc ae
ae=0.1xDc ae
ae ae=Dc
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
Aluminium Steel Materials
Wrought Aluminium alloys Aluminium cast alloys <10% Aluminium cast alloys >10%
400
0.005xDc
400
0.006xDc
400
0.007xDc
400
0.008xDc
GR10-1
400
0.005xDc
400
0.006xDc
400
0.007xDc
400
0.008xDc
GR10-2
N
350
0.005xDc
380
0.006xDc
380
0.007xDc
380
0.008xDc
GR10-3
All cutting data serve for orientation only and should be adapted individually to the technical conditions on location 1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid. 3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
238
Made with FlippingBook - Online Brochure Maker