Cutting Conditions
F642ZX F643ZX
Dc
Dc
ae=0.5xDc ae
ae ae=Dc
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
Aluminium Steel Materials
Wrought Aluminium alloys Aluminium cast alloys <10% Aluminium cast alloys >10%
400
0.008xDc
400
0.009xDc
GR10-1
400
0.008xDc
400
0.009xDc
GR10-2
N
350
0.008xDc
380
0.009xDc
GR10-3
All cutting data serve for orientation only and should be adapted individually to the technical conditions on location 1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid. 3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
240
Made with FlippingBook - Online Brochure Maker