Cutting Conditions
F618ZX F620ZX
ae
Dc
Dc
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
ae
ap
ap
Aluminium Steel Materials
Wrought Aluminium alloys Aluminium cast alloys <10% Aluminium cast alloys >10%
800
0.021xDc
0.2xDc
0.05xDc
900
0.016xDc
0.02xDc
GR10-1
800
0.021xDc
0.2xDc
0.05xDc
900
0.014xDc
0.02xDc
GR10-2
N
700
0.020xDc
0.2xDc
0.05xDc
800
0.012xDc
0.02xDc
GR10-3
All cutting data serve for orientation only and should be adapted individually to the technical conditions on location 1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid. 3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
242
Made with FlippingBook - Online Brochure Maker