Cutting Conditions
F507HX
F507HX
F506HX
F506HX
F506HX F507HX
Dc
Dc
Dc
Dc
ae=0.4xDc ae
ae ae=Dc
ae ae=Dc
ae=0.4xDc ae
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
Carbon Steel Materials
120
0.004xDc
120
0.005xDc
130
0.005xDc
140
0.006xDc
GR1 Carbon Steel
<24HRC Low-alloyed Steel <30HRC Hi-alloyed Steel 30~38HRC Hardened Steel 38~48HRC Hardened Steel
120
0.003xDc
120
0.004xDc
130
0.004xDc
140
0.005xDc
GR2
P
80
0.003xDc
80
0.003xDc
90
0.003xDc
100
0.004xDc
GR3
Hardened Steel Materials
65
0.002xDc
65
0.002xDc
65
0.002xDc
70
0.002xDc
GR4
H
60
0.0018xDc
60
0.0018xDc
60
0.0018xDc
65
0.0018xDc
GR5
Cast Lron Materials
120
0.004xDc
120
0.005xDc
130
0.005xDc
140
0.006xDc
GR9-1 Grey cast iron
K
120
0.004xDc
120
0.005xDc
130
0.005xDc
140
0.006xDc
GR9-2 Nodular cast iron
All cutting data serve for orientation only and should be adapted individually to the technical conditions on location 1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid. 3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
260
Made with FlippingBook - Online Brochure Maker