Cutting Conditions
F626TX
F625TX
F625TX F626TX
ae
Dc
Dc
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
ae
ap
ae
ap
Hardened Steel Materials
38~48HRC Hardened Steel 48~56HRC Hardened Steel 56~68HRC Hardened Steel
65
0.015xDc
0.02xDc
0.02xDc
65
0.015xDc
0.02xDc
0.02xDc
GR5
60
0.012xDc
0.02xDc
0.02xDc
60
0.012xDc
0.02xDc
0.02xDc
GR6
H
55
0.011xDc
0.02xDc
0.02xDc
55
0.011xDc
0.02xDc
0.02xDc
GR7
All cutting data serve for orientation only and should be adapted individually to the technical conditions on location 1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid. 3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
272
Made with FlippingBook - Online Brochure Maker