Cutting Conditions
F613TX F614TX
ae
Dc
Dc
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
ae
ap
ap
Carbon Steel Materials
280
0.011xDc
0.4xDc
0.03xDc
360
0.008xDc
0.01xDc
GR1 Carbon Steel
<24HRC Low-alloyed Steel <30HRC Hi-alloyed Steel 30~38HRC Hardened Steel 38~48HRC Hardened Steel 48~56HRC Hardened Steel
260
0.011xDc
0.4xDc
0.03xDc
320
0.008xDc
0.01xDc
GR2
P
230
0.009xDc
0.4xDc
0.03xDc
270
0.008xDc
0.01xDc
GR3
Hardened Steel Materials
100
0.008xDc
0.4xDc
0.03xDc
180
0.006xDc
0.01xDc
GR4
80
0.007xDc
0.3xDc
0.02xDc
160
0.005xDc
0.01xDc
H
GR5
60
0.006xDc
0.2xDc
0.01xDc
140
0.004xDc
0.01xDc
GR6
Cast Lron Materials
280
0.02xDc
0.4xDc
0.03xDc
360
0.008xDc
0.01xDc
GR9-1 Grey cast iron
K
250
0.02xDc
0.4xDc
0.03xDc
320
0.008xDc
0.01xDc
GR9-2 Nodular cast iron
All cutting data serve for orientation only and should be adapted individually to the technical conditions on location 1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid. 3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
276
Made with FlippingBook - Online Brochure Maker