Cutting Conditions
F676TX
ae
Dc
cutting speed Vc (m/min)
feed per tooth fz(mm)
ae
ap
Carbon Steel Materials
280
0.011xDc
0.4xDc
0.03xDc
GR1 Carbon Steel
<24HRC Low-alloyed Steel <30HRC Hi-alloyed Steel 30~38HRC Hardened Steel 38~48HRC Hardened Steel 48~56HRC Hardened Steel 56~68HRC Hardened Steel
260
0.011xDc
0.4xDc
0.03xDc
GR2
P
230
0.009xDc
0.4xDc
0.03xDc
GR3
Hardened Steel Materials
100
0.008xDc
0.4xDc
0.03xDc
GR4
80
0.007xDc
0.3xDc
0.02xDc
GR5
H
60
0.006xDc
0.2xDc
0.01xDc
GR6
40
0.005xDc
0.15xDc
0.01xDc
GR6
All cutting data serve for orientation only and should be adapted individually to the technical conditions on location 1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid. 3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
278
Made with FlippingBook - Online Brochure Maker