Cutting Conditions
F631ZX F631 F632
Dc
Dc
Dc
Dc
ae=0.02xDc ae
ae=0.1xDc ae
ae=0.4xDc ae
ae ae=Dc
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
Aluminium Steel Materials
Wrought Aluminium alloys Aluminium cast alloys <10% Aluminium cast alloys >10%
400
0.005×Dc
400
0.006×Dc
400
0.007×Dc
400
0.008×Dc
GR10-1
400
0.005×Dc
400
0.006×Dc
400
0.007×Dc
400
0.008×Dc
N
GR10-2
350
0.005×Dc
380
0.006×Dc
380
0.007×Dc
380
0.008×Dc
GR10-3
※ All cutting data are for reference only. Please adjust according to actual machining conditions. 1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid. 3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower than the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
282
Made with FlippingBook - Online Brochure Maker