Cutting Conditions
F507HX
F507HX
F506HX
F506HX
F506HX F507HX
Dc
Dc
Dc
Dc
ae=0.4xDc ae
ae ae=Dc
ae ae=Dc
ae=0.4xDc ae
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
Carbon Steel Materials
120
0.004×Dc
120
0.005×Dc
130
0.005×Dc
140
0.006×Dc
GR1 Carbon Steel
<24HRC Low-alloyed Steel <30HRC Hi-alloyed Steel 30~38HRC Hardened Steel 38~48HRC Hardened Steel
120
0.003×Dc
120
0.004×Dc
130
0.004×Dc
140
0.005×Dc
GR2
P
80
0.003×Dc
80
0.003×Dc
90
0.003×Dc
100
0.004×Dc
GR3
Hardened Steel Materials
65
0.002×Dc
65
0.002×Dc
65
0.002×Dc
70
0.002×Dc
GR4
H
60
0.0018×Dc
60
0.0018×Dc
60
0.0018×Dc
65
0.0018×Dc
GR5
Cast Iron Materials
120
0.004×Dc
120
0.005×Dc
130
0.005×Dc
140
0.006×Dc
GR9-1 Grey cast iron
K
120
0.004×Dc
120
0.005×Dc
130
0.005×Dc
140
0.006×Dc
GR9-2 Nodular cast iron
※ All cutting data are for reference only. Please adjust according to actual machining conditions. 1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid. 3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower than the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
298
Made with FlippingBook - Online Brochure Maker