Cutting Conditions
F606TX
F606TX
F604TX
F604TX
F604TX F606TX
Dc
Dc
Dc
Dc
ae=0.02xDc ae
ae
ae=0.4xDc ae
ae ae=Dc
ae=0.05xDc
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
cutting speed Vc (m/min)
feed per tooth fz(mm)
Carbon Steel Materials
120
0.004×Dc
120
0.005×Dc
130
0.005×Dc
140
0.004×Dc
GR1 Carbon Steel
<24HRC Low-alloyed Steel <30HRC Hi-alloyed Steel 30~38HRC Hardened Steel 38~48HRC Hardened Steel 48~56HRC Hardened Steel
120
0.003×Dc
120
0.004×Dc
130
0.004×Dc
140
0.003×Dc
GR2
P
80
0.003×Dc
80
0.003×Dc
90
0.003×Dc
100
0.003×Dc
GR3
Hardened Steel Materials
65
0.002×Dc
65
0.002×Dc
65
0.002×Dc
70
0.002×Dc
GR4
60
0.0018×Dc
60
0.0018×Dc
60
0.0018×Dc
65
0.0018×Dc
H
GR5
55
0.0015×Dc
55
0.0015×Dc
55
0.0015×Dc
60
0.0015×Dc
GR6
※ All cutting data are for reference only. Please adjust according to actual machining conditions. 1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid. 3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower than the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
300
Made with FlippingBook - Online Brochure Maker