Tungsten Carbide Rods
D
L
Code No.
D mm
L mm
Tol mm
M100 MG
M210 MG
M212 MG
RR 1.2×330L RR 1.6×330L RR 1.8×330L RR 2.3×330L RR 2.8×330L RR 3.3×330L RR 3.5×330L RR 3.8×330L RR 4.3×330L RR 4.8×330L RR 5.3×330L RR 5.8×330L RR 6.3×330L RR 6.7×330L RR 7.3×330L RR 7.8×330L RR 8.3×330L RR 8.8×330L RR 9.3×330L RR 9.8×330L RR 10.3×330L RR 10.8×330L RR 11.3×330L RR 11.8×330L RR 12.3×330L RR 12.8×330L RR 13.3×330L RR 14.3×330L RR 14.8×330L RR 15.3×330L RR 15.8×330L RR 16.3×330L RR 17.3×330L RR 18.3×330L RR 19.3×330L RR 20.3×330L RR 20.8×330L RR 21.3×330L RR 21.8×330L RR 22.3×330L RR 23.3×330L RR 24.3×330L RR 25.3×330L RR 25.8×330L RR 26.3×330L RR 28.3×330L RR 30.3×330L RR 32.6×330L
1.2 330 -0.05/+0.15 1.6 330 -0.05/+0.15 1.8 330 -0.05/+0.15 2.3 330 -0.05/+0.15 2.8 330 -0.05/+0.15 3.3 330 -0.05/+0.15 3.5 330 -0.05/+0.15 3.8 330 -0.05/+0.15 4.3 330 -0.05/+0.15 4.8 330 -0.05/+0.15 5.3 330 -0.05/+0.15 5.8 330 -0.05/+0.15 6.3 330 -0.05/+0.20 6.7 330 -0.05/+0.20 7.3 330 -0.05/+0.20 7.8 330 -0.05/+0.20 8.3 330 -0.05/+0.20 8.8 330 -0.05/+0.20 9.3 330 -0.05/+0.20 9.8 330 -0.05/+0.20 10.3 330 -0.05/+0.20 10.8 330 -0.05/+0.20 11.3 330 -0.05/+0.25 11.8 330 -0.05/+0.25 12.3 330 -0.05/+0.25 12.8 330 -0.05/+0.25 13.3 330 -0.05/+0.25 14.3 330 -0.05/+0.25 14.8 330 -0.05/+0.25 15.3 330 -0.05/+0.30 15.8 330 -0.05/+0.30 16.3 330 -0.05/+0.30 17.3 330 -0.05/+0.30 18.3 330 -0.05/+0.30 19.3 330 -0.05/+0.30 20.3 330 -0.05/+0.30 20.8 330 -0.05/+0.40 21.3 330 -0.05/+0.40 21.8 330 -0.05/+0.40 22.3 330 -0.05/+0.40 23.3 330 -0.05/+0.40 24.3 330 -0.05/+0.40 25.3 330 -0.05/+0.40 25.8 330 -0.05/+0.40 26.3 330 -0.05/+0.40 28.3 330 -0.05/+0.40 30.3 330 -0.05/+0.40 32.6 330 -0.05/+0.40
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
●
●
M100: Universal micro grain 0.8um grade, combined with 6% Cobalt content, is a premium material with excellent high wear resistance. Suitable for reaming, and milling of carbon fiber, glass fiber, composites materials, and graphite etc. Especially adopt with diamond coating. M210: Universal micro grain 0.8um grade with 10% Cobalt content shows a good TRS. It can be applied to rotating tools, and has an excellent performance on general carbon steel, alloy steel, cast iron, copper, aluminum alloys, stainless steel, and titanium alloys. M212: Universal micro grain 0.8um grade with 12% Cobalt content shows high hardness and superior toughness. It is particularly suitable as cutting tools for carbon steel, alloy steel, high temperature alloys, stainless steel, nickel alloys, titanium alloys and difficult to-cut materials, due to its high stability cutting edge.
●
●
●
●
●
●
●
531
Made with FlippingBook - Online Brochure Maker