E233SX
Recommended Milling Conditions
Side Milling
Slotting
GR.8 Stainless Steel
GR.8 Stainless Steel
Work Material
Work Material
75
70
Vc m/min
Vc m/min
RPM (min-1)
Feed (mm/min)
RPM (min-1)
Feed (mm/min)
Code No.
Dc
Code No.
Dc
E233SX-3 E233SX-4 E233SX-5 E233SX-6 E233SX-8 E233SX-10 E233SX-12 E233SX-16 E233SX-20
3 4 5 6 8
7,650 6,050 5,000 4,200 3,100 2,600 2,100 1,600 1,250
600 700 770 830 800 710 670 550 510
E233SX-3 E233SX-4 E233SX-5 E233SX-6 E233SX-8 E233SX-10 E233SX-12 E233SX-16 E233SX-20
3 4 5 6 8
7,450 5,500 4,500 3,700 2,800 2,300 1,850 1,400 1,100
450 500 530 550 525 465 430 370 330
10 12 16 20
10 12 16 20
ap:1.5D
ap:0.5D
（ mm ）
（ mm ）
ae:0.1D
1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid.
3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
34
Made with FlippingBook - Online Brochure Maker