E132 / E134
Recommended Milling Conditions
Slotting
GR.10 Aluminium
Work Material
100
Vc m/min
RPM (min-1)
Feed (mm/min)
Code No.
Dc
E132-1
1
31,500 21,000 15,500 13,000 10,500
200 200 200 250 300 300 300 300 300 300 300
E132-1.5
1.5
E132-2
2
E132-2.5
2.5
E132/E134-3 E132/E134-4 E132/E134-5 E132/E134-6 E132/E134-8 E132/E134-10 E132/E134-12
3 4 5 6 8
8,000 6,350 5,300 4,000 3,200 2,650
10 12
ap:1.0D
（ mm ）
※ Notice: E134 is Long Length series End Mills. Please adjust the parameter according. 1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid.
3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
44
Made with FlippingBook - Online Brochure Maker