End Mills For Aluminium E142
Code No. E142-Dc
Dc 0
-0.02
MG Carbide
Uncoated Bright
Dc 0 -0.02
Bright E142
Lc mm
L mm
d h6
3
8
50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 72 72 72 72 75 75 75 75
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4 4.9 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 5 6 6.9 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 7
10 10 10 10 10 10 10 11 11 11 11 11 11 11 11 11 11 13 13 13 13 13 13 13 13 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 30 30 30
40°
N
25°
Type of Operation
d
Work Material P H M K N S
N Aluminium
N Copper
Feature of product: End Mills for Aluminium- 2 Flutes Design with sharp cutting edge, high removal cutting geometry, and fine grinding smooth surface to prevent sticking problem. Larger helix angle to get better finishing. Higher finishing of cutting edge to have better surface roughness after processing. Application for roughing and finishing in various Aluminium and Copper.
8
8.5
10 10 10 10 12 12 12 12
9
9.5
10
10.5
11
11.5
12
45
Made with FlippingBook - Online Brochure Maker