E143
Recommended Milling Conditions
Slotting
Side Milling
GR.10 Aluminium
GR.10 Aluminium
Work Material
Work Material
400
400
Vc m/min
Vc m/min
RPM (min-1) 63,000 50,000 45,000 42,000 42,000 31,000 25,000 21,000 18,500 16,000 14,500 12,700 10,600
Feed (mm/min)
RPM (min-1) 63,000 50,000 45,000 42,000 42,000 31,000 25,000 21,000 18,500 16,000 14 ,500 12,700 10,600
Feed (mm/min)
Code No.
Dc
Code No.
Dc
E143-1
1
1,320 1,050 1,230 1,260 1,340 1,400 1,480 1,640 1,640 1,720 1,800 1,940 2,100 2,100 2,100 2,100 2,100
E143-1
1
1,890 1,500 1,755 1,800 1,900 2,200 2,200 2,400 2,400 2,600 2,800 3,000 3,200 3,200 3,200 3,100 3,100
E143-1.5
1.5
E143-1.5
1.5
E143-2
2
E143-2
2
E143-2.5 E143-3 E143-4 E143-5 E143-6 E143-7 E143-8 E143-9 E143-10 E143-12 E143-14 E143-16 E143-18 E143-20
2.5
E143-2.5 E143-3 E143-4 E143-5 E143-6 E143-7 E143-8 E143-9 E143-10 E143-12 E143-14 E143-16 E143-18 E143-20
2.5
3 4 5 6 7 8 9
3 4 5 6 7 8 9
10 12 14 16 18 20
10 12 14 16 18 20
9,100 7,900 7,000 6,300
9,100 8,000 7,000 6,300
ap:1.5D
0.5D
（ mm ）
（ mm ）
ae:0.1D
1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid.
3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
50
Made with FlippingBook - Online Brochure Maker