E129SX
Recommended Milling Conditions
Side Milling
GR.8 Stainless Stell
GR.15 Titanium
GR.16 Nickel
GR.17 High Temp Alloys
Work Material
65
50
30
20
Vc m/min
RPM (min-1)
Feed (mm/min)
RPM (min-1)
Feed (mm/min)
RPM (min-1)
Feed (mm/min)
RPM (min-1)
Feed (mm/min)
Code No.
Dc
E129SX-1
1
20,703
414 442 414 497 552 621 662 690 621 580 552
15,925 10,617
319 340 319 382 679 764 815 531 557 510 478
9,555 6,370 4,778 3,822 3,185 2,389 1,911 1,593 1,194
191 204 191 229 127 191 229 255 215 210 191
6,370 4,247 3,185 2,548 2,123 1,593 1,274 1,062
127 136 127 122
E129SX-1.51.5 13,802
E129SX-2
2
10,351
7,963 6,370 8,493 6,370 5,096 2,654 1,991 1,593 1,327
E129SX-2.5 2.5
8,281 6,901 5,176 4,141 3,450 2,588 2,070 1,725
E129SX-3 E129SX-4 E129SX-5 E129SX-6 E129SX-8
3 4 5 6 8
64 64 76
149 127 127 127
796 637 531
E129SX-10 10 E129SX-12 12
956 796
ap:2.0D
ap:2.0D
ap:2.0D
ap:2.0D
（ mm ）
ae:0.1D
ae:0.05D
ae:0.05D
ae:0.05D
1. Please work with good rigidity / high precision facilities and collet chuck. 2. Please choose proper cutting fluid. 3. The cutting data is reference value only. Please adjust it according to your real working conditions. 4. If RPM is lower than the reference value, the Feed rate (fz) and RPM should be reduced by the same proportion. 5. If vibration occurs during cutting, please reduce cutting parameter.
54
Made with FlippingBook - Online Brochure Maker