ISO 26623-1
ART. PSC.C63.MFSN.. ISO 26623-1/A
L
L1
DIN 1835 A - DIN 6535 HA
Ød2 ØD1
ØD2
art. BEMSN...
CIL..CTPN..W
253...W
CIL..MF..W
MANDRINO A FORTE SERRAGGIO HIGH CLAMPING CHUCK KRAFTSPANNFUTTER MANDRIN À SERRAGE FORT
0,003 2,5 x Ø 0,004 2,5 x Ø
PRE-EQUILIBRATO PRE-BALANCED
G 2,5 20000 min -1
(mm)
ART.
Ød2 ØD1 ØD2 L L1
PSC.C63.MFSN020.080 PSC.C80.MFSN032.100
PSC63 20 PSC80 32
50 67
63 63
80
58 78
BEMSN.20 BEMSN.32
925.052 ESMS.010 925.068 ESMS.010
100
1. Ridotte dimensioni di ingombro (lunghezza e diametro esterno) che consentono una migliore equilibratura (G 2,5 fino a 20000 rpm) 2. Aumento della rigidità del mandrino per una resa migliore in lavorazione 3. Perfetta centratura dell’utensile (0,003/0,004 mm a 2,5xØ) che determinano un incremento della durata degli inserti fino a raddoppiare la durata 4. Aumento della potenza di serraggio Max 1750 Nm 5. Adatto anche per frese con attacco cilindrico, weldon, whistle notch e punte in metallo duro 6. Passaggio del lubrificante attraverso l’utensile fino a 100 bar 7. Serraggio ottimale garantito dall’alineamento delle tacche (ghiera mandrino) 1. Reduced dimensions (length and external diameter) for a better balancing (G 2,5 till to 20000 rpm) 2. High rigidity of the chuck for a better performance 3. Perfect concentricity (0,003/0,004 mm 2,5xØ) for an increase in toollife 4. Increase of tightening force Max 1750 Nm 5. Suitable for endmills tools with cylindrical, weldon and whistle notch shank and for carbide drills 6. Coolant through the tool till 100 bar 7. Best clamping assured by alignment of notches (fixin ring nut/arbor) CARATTERISTICHE TECNICHE - TECHNICAL CHARACTERISTICS
Ød2 (mm)
L1 (mm)
Concentricità “S” Concentricity “S” (mm)
Forza di serraggio Clamping force (Nm)
S
Ød2
20
40
0,003
1000
32
64
0,004
1750
L1
PER AVERE UNA TENUTA DEL LUBRIFICANTE FINO A 100 bar BISOGNA ACQUISTARE IL MANDRINO CON ANELLO DI TENUTA. PER ORDINARE TALE MANDRINO, BISOGNA AGGIUNGERE AL CODICE DEL MANDRINO SCELTO UNA “F” FINALE E SPECIFI- CARLO AL MOMENTO DELL’ ORDINE. UTILIZZANDO LE PINZE DI RIDUZIONE CILINDRICHE BISOGNA SOSTITUIRE L’ANELLO DI TENUTA DEL DIAMETRO DELL’UTENSILE PRESCELTO. IL MANDRINO GARANTISCE IL PASSAGGIO DEL LUBRIFICANTE (max 100 bar), SIA CON UTENSILI CALETTATI DIRETTAMENTE SIA CON PINZE DI RIDUZIONE CILINDRICHE BEMS.. INTERPOSTE. TO OBTAIN A COOLANT FLOW UP TO 100 bar YOU MUST PURCHASE THE CHUCK WITH SEALING RING. TO ORDER THIS CHUCK YOU MUST ADD A FINAL “F” TO THE SELECTED CHUCK CODE AND SPECIFY IT WHEN PLACING THE ORDER. FOR THE USE OF THE CYLINDRICAL REDUCTION SLEEVES THE SEALING RING MUST BE REPLACED WITH ONE OF THE SAME DIAMETER AS THE TOOL CHOSEN. THE HIGH CLAMPING CHUCK IS SUITABLE FOR A COOLANT FLOW (UP TO 100 bar) BOTH WITH DIRECTLY SHRUNK-ON TOOLS AND WITH BEMS CYLINDRICAL REDUCTION SLEEVES.
PAG 1088
AGMS..
PAG. 1182
?
1042
Made with FlippingBook - Online Brochure Maker