HEATING TECHNOLOGY
ELECTRO-THERMAL VALVE ACTUATORS FOR HEATING, VENTILATION AND AIR CONDITIONING TECHNOLOGY
TECHNICAL DATA
APPLICATION
Housing colour: Housing material:
pure white, similar to RAL 9010
Extremely compact design: can be fitted quickly and comfortably thanks to the slim shape in the area around the fastening nut. Can be fitted in any position: lateral drainage holes carry off any leakage water that from the valve plunger into the open, thus avoiding damage to the drive. Additional valve monitoring: two additional viewing windows at the side allow users to visually check the respective valve position with ease; this does not work when mounted in a suspended manner.
PC plastic, GF (20%)
Ambient temperature: Storage temperature: Permissible atmospheric humidity: Mounting / attachment:
0 to 50 °C
−20 to +70 °C
Max. 95% rel. humidity, non-condensing
M 30 x 1.5
Protection rating: Protection class: Safety and EMC:
IP42
II
according to DIN EN 60730
Average power consumption: Opening / closing time:
approx. 3 W
approx. 4 min
Nominal stroke: Function type:
3 mm
normally closed
Nominal closing force:
90 N
Connecting cable:
0.8 m / 2 x 0.5 mm²
Valve position indicator:
2X (at the top and the side)
TYPE / IMAGE
ITEM NO.
FEATURES
EURO / PG
ZBOOA-010.100
Operating voltage: 230 V~, 50 Hz Max. power consumption: 70 W Max. starting current: approx. 0.3 A
H9100010
32.90 / I
ZBOOA-040.100
Operating voltage: 24 VDC or 24 VAC Max. power consumption: 12 W Max. starting current: approx. 0.5 A
H9100000
32.90 / I
Thanks to their M 30 x 1.5 fastening and their characteristics (normally closed), the actuators are suitable for the following valve and distributor makes: Beulco, Empur, Heimeier, Kamo, Oventrop, Purmo, SBK, SKV, Strawa, Taconova, Watts
BRIEF DESCRIPTION:
The drive features a compact, space-saving design. The device can be mounted easily thanks to the narrowed shape, especially in the fastening area of the nut. The fastening cable is not located near the fastening nut. This reduces the probability of contact with equipment carrying hot water. Since the fastening nut allows continuous screwing onto the thread, by unscrewing the nut by two or three turns, it is possible to open the valve in an electrically
de-energised state – something that cannot be done with bayonet couplings and impulse couplings. Discharged water is dissipated via a draining system. Gaskets are not required thanks to the special design.
THE DUAL POSITION DISPLAY OFFERS THE FOLLOWING ADVANTAGES:
The upper display provides the option of a visual or, in conditions of bad visibility, tactile function test of the drive. The lower viewing windows allow an additional check to determine whether the valve to be actuated follows the lifting movement of the drive. At the beginning of the heating period, it can happen off and on that the valve plungers get “stuck”. Therefore, with the additional display, it is possible to determine whether the cause lies with the actuator or with the valve in the event the valve does not open. However, that is not possible when mounted in a suspended manner.
ILLUSTRATIONS
VALVE ACTUATOR WITH EXTENDED PUSH ROD
109
Catalogue 2025
Prices valid from 01.01.2025 – 31.12.2025, prices may be subject to change | V1
Made with FlippingBook Annual report maker