PLANT ENGINEERING
UNIVERSAL CAPILLARY THERMOSTAT RTKSA CAPILLARY SYSTEM – TÜV-TESTED
TECHNICAL DATA
APPLICATION
Colour:
anthracite grey (similar to RAL 7016), front side transparent
This series of devices was specially developed for use in heating technolo- gy; in boiler systems or storage tanks; district heating transfer stations and heat transfer systems; in ventilation technology to monitor supply air or as limiters for electrical heating coils, as well as for controlling and monitoring temperatures in pipelines and tanks. Immersion sleeves, protection coils and mounting sets are not included in the scope of delivery. The JZ-29 mounting set must be used in conjunction with immersion sleeves or protection coils. When used as contact controller (pipe mounting), mounting set JZ-31 must be used, except with models RTKSA-000 100 and RTKSA-001 100.
Sensor material: Sensor length:
Cu
2 m
Max. sensor temperature: Max. head temperature: Permissible atmospheric humidity:
Top scale value +15%
80 °C
Max. 95% rel. humidity, non-condensing
Operating voltage:
none
Max. switching current:
NC contact: 16 (2.5) A at 230 VAC +10% 0.25 A at 230 VDC +10% NO contact TR / TW / STW: 6.3 (2.5) A at 230 VAC +10% 0.25 A at 230 VDC +10% NO contact TB: 2.0 (0.4) A at 230 VAC +10% 0.25 A at 230 VDC +10% Min. 100 mA at 24 V (AC / DC) 230 VAC 50 / 60 Hz, 230 VDC
Min. switching current: Max. switching voltage: Min. switching voltage:
Type testing by TÜV in accordance with DIN EN 14597
24 VAC / 50 Hz, 24 VDC
Switching element: Switching contact:
microswitch
toggler, potential-free heating or cooling
Control range:
Electrical connection: Mounting / attachment:
Push-in terminals
Wall mounting or with optional process connection (immersion sleeve, protection coil or mounting set JZ-31 for pipe mounting)
Protection class: Protection rating:
I
RTKSA-xxx.x0x IP40, RTKSA-xxx.x1x IP54, optional IP65
Safety and EMC:
In accordance with DIN EN 60730 (VDE 0631) liquid-filled capillary scale: degrees Celsius
Sensor:
General features:
TYPE
ITEM NO.
CONTROL RANGE HYSTERESIS
SENSOR Ø X L
FEATURES
EURO / PG
RTKSA-000.100
KA000000
0 to 50 °C
1.3 K
6 x 175 mm
TR, external setting
68.80 / II
RTKSA-000.200
KA000001
0 to 120 °C
3 K
6 x 87 mm
TR, external setting
69.70 / II
RTKSA-000.300
KA000002
20 to 150 °C
9.1 K
6 x 56 mm
TR, external setting
69.70 / II
RTKSA-001.100
KA000100
0 to 50 °C
1.3 K
6 x 175 mm
TW, internal setting
72.20 / II
RTKSA-001.200
KA000101
0 to 120 °C
3 K
6 x 87 mm
TW, internal setting
72.20 / II
RTKSA-001.300
KA000102
20 to 150 °C
9.1 K
6 x 56 mm
TW, internal setting
72.20 / II
RTKSA-001.301
KA000103
20 to 150 °C
3.3 K
6 x 82 mm
TW, internal setting
72.20 / II
RTKSA-002.310
KA000201
20 to 150 °C
–10 to –15K*
6 x 55 mm
TB, internal setting, external reset TB, internal setting, external reset STB, internal setting, external reset
84.30 / II
RTKSA-002.410
KA000200
30 to 110 °C
–10 to –15K*
6 x 72 mm
80.30 / II
RTKSA-003.310
KA000300
20 to 150 °C
–10 to –15K*
6 x 55 mm
98.10 / II
RTKSA-004.310
KA000400
20 to 150 °C
–10 K
6 x 55 mm
STW, internal setting
89.90 / II
TR = temperature controller, TW = temperature monitor, TB = temperature limiter, STB = safety temperature limiter, STW = safety temperature monitor * Manual reset after cooling down by 10–15 K (depending on configured setpoint)
168
Catalogue 2024
Prices valid from 01.01.2024 - 31.12.2024, prices may be subject to change | V1
Made with FlippingBook Annual report maker