PLANT ENGINEERING
CONTROLLER FOR DISTRIBUTOR ASSEMBLY (HAT RAIL) ITR 79 REMOTE SENSOR, ELECTRONIC
TECHNICAL DATA
APPLICATION
Housing colour:
grey, similar to RAL 7035
Control and monitoring of the tempera- ture in large halls, greenhouses and floor heating systems. The devices have sensor rupture and sensor short-circuit protection. Sensors are not a part of the delivery scope (except for ITR 79.804) For available sensors, see the ‘Sensor technology’ section. Use sensors according to the specified sensor number (for example, for sensor number 4: All sensors with this number can be used, e.g., KF-4). Avoid parallel routing of sensor wires together with mains voltage-bearing wires ore use shielded wires.
Ambient temperature: Permissible atmospheric humidity:
−10 to +40 °C
Max. 95% rel. humidity, non-condensing
Operating voltage:
230 V AC, 50 Hz
Max. switching current:
NO contact: 10 (2) A, NC contact: 5 (1.5) A The resistance of the contact transition results in a voltage drop across the con- tact. This can have a strong influence on very small switching signals.
Min. switching current:
Max. switching voltage: Min. switching voltage: Switching element: Switching contact: Electrical connection: Mounting / attachment:
230 V AC, 50 Hz
5 VAC, 50 Hz
relay
toggler, potential-free
screw-type terminals up to 2.5 mm² on supporting rails (35 mm) according to EN 60715
Protection rating: Protection class: Safety and EMC: Function type: General features:
IP20
II
according to DIN EN 60730 TR (temperature controller)
external setting
CONTROL RANGE
TYPE
ITEM NO.
FEATURES
EURO / PG
ITR 79.402
D4780167
−35 to +15 °C Control function: heating, hysteresis adjustable: approx. 0.5–5 K, sensor: NTC 1 K (sensor 1), scale: degrees Celsius, display ‘heating’ red
106.30 / II
ITR 79.404
D4780155
0 to 60 °C
Control function: heating, hysteresis adjustable: approx. 0.5–5 K, sensor: NTC 10 K (sensor 4), scale: degrees Celsius, display ‘heating’ red Control function: heating, hysteresis adjustable: approx. 0.5–5 K, sensor: NTC 50 K (sensor 5), scale: degrees Celsius, display ‘heating’ red
106.30 / II
ITR 79.405
D4780181
35 to 95 °C
106.30 / II
ITR 79.408
D4780179
−10 to +40 °C Control function: heating, hysteresis adjustable: approx. 0.5–5 K, sensor: NTC 8 K (sensor 3), scale: degrees Celsius, display ‘heating’ red
111.10 / II
ITR 79.503
D4780524
0 to 11 °C
Control function: heating, frost protection locked when the temperature is dropping, hysteresis approx. 1.5 K, sensor: NTC 2 K 25 (sensor 0), scale: degrees Celsius, display ‘heating’ red Control function: cooling, hysteresis adjustable: approx. 0.5–5 K, sensor: NTC 10 K (sensor 4), scale: degrees Celsius, display ‘cooling’ green
120.60 / II
ITR 79.504
D4780371
0 to 60 °C
111.10 / II
ITR 79.508
D4780369
−10 to +40 °C Control function: cooling, hysteresis adjustable: approx. 0.5–5 K,
111.10 / II
sensor: NTC 8 K (sensor 3), scale: degrees Celsius, display ‘cooling’ green
TWO SETPOINT ADJUSTERS (E.G., DAY/NIGHT TEMPERATURE VIA EXTERNAL CLOCK)
EURO / PG
ITR 79.600
D4780508
2 x 5 to 30 °C
Control function: heating, hysteresis: approx. 0.5 K, sensor: NTC 47 K (sensor 2), ECO contact: toggling between setpoint value 1 and setpoint value 2, scale: degrees Celsius
124.50 / II
COMPLETE DEVICE INCLUDING REMOTE SENSOR HF-8/4-K2 (4-M CABLE)
EURO / PG
ITR 79.804
D4780545
0 to 60 °C
Control function: heating, hysteresis adjustable: approx. 0.5–5 K, sensor: NTC 2 K (sensor 8), multi-digit scale 0–6, display ‘heating’ red
142.40 / II
ACCESSORIES ITEM NO.
FEATURES
EURO / PG
JZ-13
ZA990001
Standard rail with drilled holes for fastening control cabinet controllers (length 40 mm)
5.60 / II
194
Catalogue 2024
Prices valid from 01.01.2024 - 31.12.2024, prices may be subject to change | V1
Made with FlippingBook Annual report maker