SENSOR TECHNOLOGY
OUTDOOR TEMPERATURE SENSORS AFH WITH PASSIVE OUTPUT AFH … OUTDOOR TEMPERATURE SENSOR WITH SLEEVE LEAD-OUT
TECHNICAL SPECIFICA- TIONS
APPLICATION
Housing colour: Housing material:
pure white, similar to RAL 9010 PA plastic (30% GF reinforced)
The outdoor temperature sensors are used for temperature measurement in the outdoors, in damp room applications, in cold storage rooms and greenhouses as well as in industrial applications and are specially protected against dust and moisture. Owing to the external sensor sleeve, this outdoor sensor has a very good actuation response to temperature changes. If there is direct incident sunlight on the sensor, the use of a sun shade is recommended.
Operating voltage (active): Ambient temperature: Permissible atmospheric humidity: Max. measurement current (passive):
24 VDC
−30 to +70 °C
max. 95% rel. humidity, non-condensing
< 1 mA
Electrical connection:
Screw-type terminals 0.14 mm² to 2.5 mm² only at protective low voltage, max. passive output: 30 VAC / 42 V DC depending on the cross-section of the conductor and the sensor unit type PT100 / PT1000 DIN EN 60751 B
Sensor wire extendable: Tolerances:
Mounting / attachment:
surface / wall mounting
Protection rating: Protection class:
IP65
III
Safety and EMC: according to DIN EN 60730 Please follow the EMC directives, avoid parallel routing with mains voltage-bearing wires, or use shielded wires.
SENSOR
TYPE
ITEM NO.
EURO / PG
PT 100
AFHP 100
G9040160
44.30 / III
PT 1000
AFHP 1000
G9040170
44.30 / III
NTC 10K ‘Sensor 4’
AFHC 10
G9040220
44.30 / III
ILLUSTRATIONS
216
Catalogue 2024
Prices valid from 01.01.2024 - 31.12.2024, prices may be subject to change | V1
Made with FlippingBook Annual report maker