BUILDING AUTOMATION
ALRE BACNET INDIVIDUAL ROOM CONTROLLER ADAPTATION KTRBUU217.456 – FLUSH-MOUNTED
MANUFACTURER RANGE
COLOUR RAL 9010 (surface finish)
ADAPTATION in switch range (55 x 55) possible with… KTRBUu217.456#56 KTRBUu217.456#55 KTRBUu217.456#56 KTRBUu217.456#55 KTRBUu217.456#56 KTRBUu217.456#55
‘50 X 50’ adaptation possible with… (insert frame from manufacturer required)
BERKER BERKER BERKER BERKER BERKER BERKER BERKER BERKER
S.1 S.1
polar white (matt) polar white (glossy) polar white (glossy)
not required not required
Arsys
KTRBUu217.456#07 + 1108 01 69
B.3 B.3 B.7 B.7 K.1
aluminium / polar white (matt) aluminium / polar white (glossy) glass / polar white (matt) glass / polar white (glossy)
not required not required not required not required
polar white (glossy) alpine white (glossy) alpine white (glossy) alpine white (glossy)
KTRBUu217.456#07 + 1108 71 09
BUSCH-JAEGER BUSCH-JAEGER BUSCH-JAEGER BUSCH-JAEGER
Reflex SI / SI Linear Busch-balance SI
KTRBUu217.456#28 KTRBUu217.456#55
not required not required
impuls
KTRBUu217.456#07 + 1746 / 10-74
solo / future / axcent etc.
studio white – see RAL 9016 below
Elso Elso GIRA
Joy
pure white (glossy) pure white (glossy) pure white (glossy)
KTRBUu217.456#55
not required
Fashion / Riva / Scala surface switch Standard / E2 Standard / E2 / E3
KTRBUu217.456#07 + (203084) KTRBUu217.456#07 + 0282 112
GIRA (System 55) GIRA (System 55) GIRA (System 55) GIRA (System 55) GIRA (System 55) GIRA (System 55)
pure white (semi-gloss)
KTRBUu217.456#56 KTRBUu217.456#55 KTRBUu217.456#55
not required not required not required not required not required not required
pure white (glossy) pure white (glossy)
E22
Event Event Esprit
pure white (semi-gloss) + opaque… KTRBUu217.456#56
pure white (glossy) + opaque… pure white (semi-gloss) + glass, aluminium… pure white (glossy) + glass, aluminium…
KTRBUu217.456#55 KTRBUu217.456#56
GIRA (System 55)
Esprit
KTRBUu217.456#55
not required
GIRA JUNG JUNG JUNG JUNG JUNG JUNG
S-Color
pure white (high-gloss) alpine white (glossy) alpine white (glossy) alpine white (glossy) alpine white (glass) alpine white (glossy) alpine white (glossy) polar white (matt) polar white (glossy)
KTRBUu217.456#07 + 0282 40 KTRBUu217.456#07 + CD 590 Z WW
CD 500 / CD plus
A 500 / A 550 / AS 500 / A plus / A flow
KTRBUu217.456#55
not required
LS 990 LS plus
KTRBUu217.456#07 + LS 961 Z WW KTRBUu217.456#07 + LS 961 Z WW
A creation LS Design
KTRBUu217.456#55
not required
KTRBUu217.456#07 + LS 961 Z WW
MERTEN (System M) MERTEN (System M)
M-Smart, M-Plan, M-Pure M-Smart, M-Plan, M-Creativ, M-Pure
KTRBUu217.456#56 KTRBUu217.456#55
not required not required
MERTEN (System Basis)
1-M / Atelier-M
polar white (glossy) polar white (glossy)
KTRBUu217.456#55
not required
MERTEN (Surface System) Artec / Antik
KTRBUu217.456#07 + 5160 99
MERTEN
1-M / M-Smart / M-Plan / M-Pure / D-Life
active white – see RAL 9016 below
PEHA PEHA PEHA PEHA
Standard
pure white (glossy) pure white (glossy)
KTRBUu217.456#07 + 80.670.02 ZV KTRBUu217.456#07 + 95.670.02 ZV KTRBUu217.456#07 + 20.670.02 ZV KTRBUu217.456#07 + 11.670.02 ZV To ADAPT KTRBUu size 50 x 50, an insert frame from the manufacturer is required KTRBUu217.456#27 + 1746 / 10-84 KTRBUu217.456#27 + 1746 / 10-84 KTRBUu217.456#27 + 1746 / 10-84 KTRBUu217.456#27 + 1746 / 10-24G
Dialog
Aura
pure white (matt) / glass
Badora
pure white (glossy)
MANUFACTURER RANGE
COLOUR RAL 9016 (surface finish)
ADAPTATION in switch range (55 x 55) possible with…
BUSCH-JAEGER BUSCH-JAEGER BUSCH-JAEGER BUSCH-JAEGER
solo / future / future linear
studio white (RAL 9016, glossy) studio white (RAL 9016, glossy)
axcent
carat (glass, bronze, gold) alpha (nea / exclusive *) M-Smart, M-Plan, M-Pure
studio white (RAL 9016)
studio white (RAL 9016, glossy) active white (RAL 9016, glossy) active white (RAL 9016, glossy)
MERTEN MERTEN Merten
KTRBUu217.456#59 KTRBUu217.456#59
not required not required
1-M / Atelier-M
D-Life
lotus white (RAL 9016)
KTRBUu217.456#27 + MEG4500-6035 KTRBUu217.456#27 + D 80.670 ZV AW
PEHA
Standard
arctic
*) During assembly, you need to remove 4 plastic tabs located at the rear of the frame. NOTE: Most light switches are designed in the colour ‘similar to RAL 9010’, although different switch manufacturers use different designations for this colour. Coloured, glass and aluminium frames are also combined with white jacks or plugs so that controllers with white covers can also be integrated into these frames. Check the precise application in each individual case. The frames have different surface qualities (matt / glossy). For design reasons, the cover of the controller should have the same quality as the frame. We accept no liability for slight variations in colour and surface finish or for accuracy of fit. When installing devices into multi frames, always assemble the temperature controllers at the lowermost position. ‘50 x 50 controller’: The housing covers of the 50 x 50 controllers are 50 x 50 mm in size. Using a 50 x 50 mm insert frame, they can be integrated into nearly all light switch ranges in accordance with DIN 49075. The 50 x 50 mm insert frames must be ordered from the light switch manufacturer or from a wholesaler. The order number of the insert frame corresponding to the switch range in question can be found in the column ‘For adaptation of ‘50 x 50’ KTRBUu’. ‘55 x 55 controller’: The housing covers of the 55 x 55 controllers are 55 x 55 mm in size. Many light switch ranges have inner dimensions of 55 x 55 mm. Therefore, the 55 x 55 controllers can be installed directly in the light switch frame without the use of an insert frame. See the column ‘Adaptation in switch range (55 x 55)’ to determine whether the 55 x 55 controller fits in the given light switch range (KTRBUu217.456#xx). All information regarding switch manufacturers’ product lines and item numbers was last updated in 12 / 2022 | No liability is assumed for the information provided. | Technical specifications subject to change.
50
Catalogue 2023
Prices valid from 01.01.2024 - 31.12.2024, prices may be subject to change | V1
Made with FlippingBook Annual report maker