HEATING TECHNOLOGY
ROOM TEMPERATURE OR FLOOR TEMPERATURE CONTROLLER ELECTRONIC WITH CLOCK HTRRUU FLUSH-MOUNTED INSTALLATION – DESIGN BERLIN FLUSH-MOUNTED
TECHNICAL DATA
APPLICATION
Design:
Berlin flush-mounted PC, PMMA, ABS plastic
Flush-mounted controller for time-dependent single room or floor temperature control for electrical and hot water heating systems (normally closed actuators). The device can be used as a room temperature controller with internal sensor or (in combination with an optional remote sensor) as a room temperature controller with floor monitoring or floor temperature controller. (Remote sensor is not a part of the scope of delivery) This clock thermostat has a weekly timer with individually adjustable programs (factory setting: ‘normal’ daily sequences). Self-learning function: Automatic adjustment of the controller to the start of the heating period. The goal is to achieve the comfort temperature at the time that has been set. The learn- ing function is disabled upon delivery, but it can be enabled. Standby function: This function disables the control; frost protection is still ensured.
Housing material: Operating voltage:
230 V AC, 50 Hz −20 to +70 °C
Storage temperature: Permissible atmospheric humidity: Electrical connection: Mounting / attachment:
Max. 95% rel. humidity, non-condensing pluggable screw terminals
in flush-mounted socket, can be adapted to fit virtually any switch range (deep flush-mounted socket recommended) see adaptation list page 95
Protection rating: Protection class: Safety and EMC:
IP30
II, if properly mounted
according to DIN EN 60730
Max. switching current: Max. switching voltage: Min. switching voltage:
10 (2) A
230 V AC, 50 Hz 230 V AC, 50 Hz
Switching power: Switching element: Switching contact:
2300 W
relay
NO contact
Output signal:
230 V AC, 50 Hz
Sensor:
NTC internal, optional external floor sensor see ‘Accessories’, optional external room sensor see ‘Sensor technology’ ‘Sensor 2’ If the internal or external sensor is faulty or the external sensor is not connected to the functions room temperature controller with floor monitoring, floor temperature controller or room temperature controller with ext. sensor, emergency operation is triggered.
Sensor rupture and short-cir- cuit protection:
General features: ECO function, adjustable ECO
value; ‘ECO’ display; ‘on / off’ display; ‘heating’ display; digital actual value display; backlighting; standby mode with frost protection monitoring; child-safe features; load setting; power reserve (approx. 5 days); Actual value correction / measured value correction; learning function; valve protection; holiday setting; party setting; external setting; comfortable operation using touch-sensitive buttons; VDE-tested Special colours as well as the colours anthracite and aluminium are available for projects upon request.
Control function: Control range: Setting range:
heating
5 to 30 °C (room) / 10 to 42 °C (floor) The setting range varies, depending on the use of the controller as a room temperature controller (5 to 30 °C) or floor temperature controller (10 to 42 °C) for room control < 1 K, for floor control < 1 K
Hysteresis: Display type:
illuminated graphical display
Display:
setpoint, actual temperature / date, time; setpoint, actual temperature or date, time terminal strips: VOOPL suitable valve actuators: ZBOOA-010.1xx
Accessories:
TYPE / IMAGE
ITEM NO.
FEATURES
CIRCUIT DIAGRAM
EURO / PG
HTRRUu 210.021#21
Scope of delivery: controller, 50 x 50 mm cover, pure white (similar to RAL 9010), glossy, alre frame ‘Berlin’
UA060000
229.60 / I
HTRRUu 210.021#07
UA060001
Similar to HTRRUu 210.021#21 but scope of delivery as follows: controller, 50 x 50 mm cover pure white (similar to RAL 9010), glossy, without frame
225.20 / I
92
Catalogue 2025
Prices valid from 01.01.2025 – 31.12.2025, prices may be subject to change | V1
Made with FlippingBook Annual report maker