‘SURFACE-MOUNTED’
HEATING TECHNOLOGY
FLOOR OR SURFACE TEMPERATURE CONTROLLER, ELECTRONIC, WITH REMOTE SENSOR (FOR FLOOR HEATING/WALL AND CEILING HEATING/TILED STOVE) HTRRB SURFACE-MOUNTED INSTALLATION – DESIGN BERLIN 2000
TECHNICAL DATA
APPLICATION
Design:
Berlin 2000
Temperature control (e.g.., of electrical heating systems) for floor, fringe zone, bathroom, ceiling, tiled stove, marble and wall heating systems or tempering systems. Note: The sensor line must be routed in a protective pipe. Parallel routing to- gether with lines that carry alternating currents is not permitted. Floor temperature controller with clock: HTRRBu-110.021 Floor temperature controller for distributor assembly: ITR 79 Series (plant engineering)
Surface finish: Housing colour: Housing material: Operating voltage:
matt
pure white, similar to RAL 9010
ABS plastic
230 V AC, 50 Hz
Ambient temperature: Storage temperature: Permissible atmospheric humidity: Electrical connection: Mounting / attachment:
0 to 30 °C
−20 to +70 °C
Max. 95% rel. humidity, non-condensing screw-type terminals
surface- / wall-mounting (4-hole assembly on flush-mounted socket)
Protection rating: Protection class: Safety and EMC:
IP30
II, if properly mounted
according to DIN EN 60730
Max. switching current: Max. switching voltage: Min. switching voltage:
13 (2) A
230 V AC, 50 Hz 230 V AC, 50 Hz
Switching power: Switching element: Switching contact:
3000 W
relay
NO contact
Output signal:
230 V AC, 50 Hz
Sensor:
external, NTC
Sensor rupture and short-circuit protection:
heating is switched off
Control function:
heating
Hysteresis:
approx. 1 K
General features:
‘heating’ display: mechanical range limitation; 3000 W switching power for electric direct heating systems, natural stone heating; ‘on / off’ switch; external setting
TYPE / IMAGE
ITEM NO.
FEATURES
CIRCUIT DIAGRAM EURO / PG
HTRRB-011.010
General features: Floor temperature controller with remote sensor HF-8 / 4-K2 4 m, multi-digit display 1– 6 Control range: 10 to 60 °C Note: The setting range can be adjusted to 10 to 40 °C (for example) using the mechanical range limitation as a replacement for the type HTRRB-010.310 . General features: Tiled stove surface temperature controller with remote sensor HF-5 / 4-K3 4 m; scale: degrees Celsius; threshold arrow Control range: 20 – 80 °C
DA400000
139.10 / I
HTRRB-011.410
DA400100
197.40 / I
96
Catalogue 2025
Prices valid from 01.01.2025 – 31.12.2025, prices may be subject to change | V1
Made with FlippingBook Annual report maker