Sublimation Oven Plus

This is an interactive catalogue showcasing all our printing solutions offered to you. Click the links and videos within the catalogue for more information.

Email: techsupport@jgelectronics.com

Tel: 011 789 6033

Web: www.jgelectronics.com Fax: 011 781 3065 _______________________________________________________________________________________

Instructions for: Sublimation Transfer Oven Plus

Safety Instruction

To ensure safe and proper operation of your equipment, always adhere to the following precautions:

1. Read All Instructions: Carefully read and follow all instructions provided with the oven before use.

2. Intended Use Only: Use the oven exclusively for its intended purpose. Any misuse can result in injury or damage.

3. Avoid Immersion: To reduce the risk of electric shock, do not immerse the oven in water or other liquids.

4. Unplug Safely: Never pull the cord to disconnect the oven from the outlet. Always grasp the plug and pull to disconnect it.

5. Cord Care: Do not allow the power cord to touch hot surfaces. Ensure the oven has cooled completely before storing it.

6. Damaged Equipment: Do not operate the oven if the cord is damaged or if the equipment has been dropped or damaged in any way. To reduce the risk of electric shock, do not attempt to disassemble or repair the oven yourself. Instead, take it to a qualified service technician for inspection and repair. Incorrect assembly or repairs could increase the risk of fire, electric shock, or personal injury. 7. Use by Children or Disabled Persons: This appliance is not intended for use by individuals with reduced physical, sensory, or mental capabilities, or those without experience or knowledge, unless supervised or instructed on its safe use by a responsible person.

8. Supervision Around Children: Close supervision is required when the oven is used by or near children. Never leave the equipment unattended while it is connected.

9. Burn Risk: Be aware that burns can occur when touching hot metal parts. Exercise caution when handling the equipment.

10. Avoid Circuit Overload: To reduce the risk of circuit overload, do not operate other high- voltage equipment on the same circuit as the oven.

11. Extension Cord Requirements: If using an extension cord, ensure it is rated for at least 15 amps. Using cords rated for lower amperage may cause overheating. Arrange the cord so it cannot be pulled or tripped over.

HOW TO USE THE Digital CONTROL PANEL:

1. Switch the Oven on/off

- Plug in the oven. The power button on the digital screen will start flashing. Press the button to switch the oven on.

2. Set the Temperature

- You will see the digital screen activate. Press the Celsius button if it is not yet set to Celsius.

- Press the temperature button, and the display will start flashing. Use the plus and minus buttons to adjust the temperature up or down.

3. Set the Time

- Press the time button—the display will begin flashing. Use the plus and minus buttons to adjust the time up or down.

4. Start Heating

a) After parameter setting, press the Play/Start button, and you will see the letters “PrE” flashing on the screen, which means it is busy preheating.

b) The machine will beep 3 times to inform you as it reaches the set temperature. c) Put the product in the Oven and press the Play/Start button again. The clock will start counting down.

d) When the oven beeps again, the process is complete. Carefully remove your product, open the heat-shrink bag, and remove the transfer paper

NB - Heat Shrink Bag times and temperatures are listed on the next page:

Heat Shrink Bags Time and Temp

PLEASE NOTE: REMOVE ALL PLASTIC PARTS FROM THE PRODUCT BEFORE YOU PLACE IT IN THE OVEN.

IF NOT POSSIBLE, DO NOT USE THE PRODUCT IN THE OVEN. THE PLASTIC WILL MELT.

PRODUCT

TEMP

TIME

Stones:

180°C

19 min

All Ceramic mugs &

180°C

13 min

Mini Ceramic mugs

Sports Bottles/Tumblers/Flasks/

160°C

9 min

Tin Enamel mugs, Wine Tumblers

Mug 40oz White Stanley Cup

180°C

13 min

Tiles

180°C

13 min

Glass Mugs/Beer glass/

180°C

13 min

Tile Glass Photo

Polymer/Plastic Mugs

180°C

15 min

Metal Sublimation Pens

200°C

5 min

Pet Bowls

180°C

7 min

Ceramic Bowl

180°C

18min

Polymer Utensil

200°C

5min

Page 1 Page 2 Page 3 Page 4 Page 5

www.jgelectronics.com

Made with FlippingBook - professional solution for displaying marketing and sales documents online