STYCCOBOND F46 According to UK REACH (S.I. 2019/758) Safety data sheet
SECTION 6: ACCIDENTAL RELEASE MEASURES (continued) 6.1 Personal precautions, protective equipment and emergency procedures: For non-emergency personnel:
Isolate leaks provided that there is no additional risk for the people performing this task. Personal protection equipment must be used against potential contact with the spilt product (See section 8). Evacuate the area and keep out those who do not have protection. For emergency responders: Wear protective equipment. Keep unprotected persons away. See section 8. 6.2 Environmental precautions: It is recommended to avoid environmental spillage of both the product and its container. 6.3 Methods and material for containment and cleaning up: It is recommended: Absorb the spillage using sand or inert absorbent and move it to a safe place. Do not absorb in sawdust or other combustible absorbents. For any concern related to disposal consult section 13. 6.4 Reference to other sections: See sections 8 and 13. SECTION 7: HANDLING AND STORAGE 7.1 Precautions for safe handling: A.- General precautions for safe use Comply with the current legislation concerning the prevention of industrial risks with regards manually handling weights. Product is non-flammable under normal conditions of storage, handling and use. It is recommended to transfer at slow speeds to avoid the generation of electrostatic charges that can affect flammable products. Consult section 10 for information on conditions and materials that should be avoided. C.- Technical recommendations on general occupational hygiene Do not eat or drink during the process, washing hands afterwards with suitable cleaning products. D.-Technical recommendations to prevent environmental risks It is recommended to have absorbent material available at close proximity to the product (See subsection 6.3) 7.2 Conditions for safe storage, including any incompatibilities: A.- Specific storage requirements Minimum Temp.: 5 ºC Maximum Temp.: 30 ºC B.- General conditions for storage Avoid sources of heat, radiation, static electricity and contact with food. For additional information see subsection 10.5 7.3 Specific end use(s): Except for the instructions already specified it is not necessary to provide any special recommendation regarding the uses of this product. Maintain order, cleanliness and dispose of using safe methods (section 6). B.- Technical recommendations for the prevention of fires and explosions
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 Control parameters: Substances whose occupational exposure limits have to be monitored in the workplace: There are no applicable occupational exposure limits for the substances contained in the product DNEL (Workers): Not relevant DNEL (General population): Not relevant - CONTINUED ON NEXT PAGE - Date of compilation: 14/03/2023 Revised: 06/06/2023 Version: 19 (Replaced 18)
Page 3/9
Made with FlippingBook - Online catalogs