STYCCOBOND F3 According to UK REACH (S.I. 2019/758) Safety data sheet
SECTION 4: FIRST AID MEASURES (continued) In case of contact it is recommended to clean the affected area thoroughly with water and neutral soap. In case of changes to the skin (stinging, redness, rashes, blisters,…), seek medical advice with this Safety Data Sheet By eye contact: Rinse with water until the product has been eliminated. In case of problems, consult a doctor showing the SDS for the product. By ingestion/aspiration: In case of consumption in large quantities, it is recommended to seek medical assistance. 4.2 Most important symptoms and effects, both acute and delayed: Acute and delayed effects are indicated in sections 2 and 11. 4.3 Indication of any immediate medical attention and special treatment needed: Not relevant
SECTION 5: FIREFIGHTING MEASURES 5.1 Extinguishing media: Suitable extinguishing media:
Product is non-flammable, with a low risk of fire due to the flammability characteristics of the product in normal conditions of storage, handling and use. In the case of the existence of sustained combustion as a result of improper handling, storage or use any type of extinguishing agent can be used (ABC Powder, water,...) Unsuitable extinguishing media: Non-applicable 5.2 Special hazards arising from the substance or mixture: Due to its non-inflammable nature, the product does not present a fire risk under normal conditions of storage, handling and use. 5.3 Advice for firefighters: Depending on the magnitude of the fire it may be necessary to use full protective clothing and self-contained breathing apparatus (SCBA). Minimum emergency facilities and equipment should be available (fire blankets, portable first aid kit,...). Additional provisions: Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an accident or other emergencies. Eliminate all sources of ignition. In case of fire, cool the storage containers and tanks for products susceptible to combustion, explosion or BLEVE as a result of high temperatures. Avoid spillage of the products used to extinguish the fire into an aqueous medium. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1 Personal precautions, protective equipment and emergency procedures: For non-emergency personnel: Isolate leaks provided that there is no additional risk for the people performing this task. For emergency responders: Wear protective equipment. Keep unprotected persons away. See section 8. 6.2 Environmental precautions: This product is not classified as hazardous to the environment. Keep product away from drains, surface and ground water. 6.3 Methods and material for containment and cleaning up: It is recommended: Absorb the spillage using sand or inert absorbent and move it to a safe place. Do not absorb in sawdust or other combustible absorbents. For any concern related to disposal consult section 13. 6.4 Reference to other sections: See sections 8 and 13.
SECTION 7: HANDLING AND STORAGE 7.1 Precautions for safe handling:
- CONTINUED ON NEXT PAGE -
Page 2/8
Date of compilation: 05/01/2024
Revised: 16/05/2024
Version: 23 (Replaced 22)
Made with FlippingBook interactive PDF creator