STYCCOBOND F3 According to UK REACH (S.I. 2019/758) Safety data sheet
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION (continued)
Pictogram
PPE
Remarks
Clean daily and disinfect periodically according to the manufacturer´s instructions. Use if there is a risk of splashing.
Panoramic glasses against splash/projections.
Mandatory face protection
E.- Body protection Pictogram
PPE
Remarks
Replace before any evidence of deterioration. For periods of prolonged exposure to the product for professional/industrial users CE III is recommended, in accordance with the regulations in EN ISO 6529:2013, EN ISO 6530:2005, EN ISO 13688:2013, EN 464:1994.
Work clothing
Replace before any evidence of deterioration. For periods of prolonged exposure to the product for professional/industrial users CE III is recommended, in accordance with the regulations in EN ISO 20345:2012 y EN 13832-1:2007
Anti-slip work shoes
F.- Additional emergency measures It is not necessary to take additional emergency measures. Environmental exposure controls: In accordance with the community legislation for the protection of the environment it is recommended to avoid environmental spillage of both the product and its container. For additional information see subsection 7.1.D The Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations 2012: V.O.C. (Supply): 0 % weight V.O.C. density at 20 ºC: Not relevant
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1 Information on basic physical and chemical properties: For complete information see the product datasheet. Appearance: Physical state at 20 ºC: Liquid Appearance: Not available Colour: Not available Odour: Not available Odour threshold: Not relevant * Volatility: Boiling point at atmospheric pressure: 389 ºC Vapour pressure at 20 ºC: 1.158E-2 Pa Vapour pressure at 50 ºC: 0.07 Pa (0 kPa) Evaporation rate at 20 ºC: Not relevant * Product description: Density at 20 ºC: Not relevant * Relative density at 20 ºC: 1.23 Dynamic viscosity at 20 ºC: Not relevant * Kinematic viscosity at 20 ºC: Not relevant * Kinematic viscosity at 40 ºC: Not relevant * Concentration: Not relevant * pH: 7 - 8 *Not relevant due to the nature of the product, not providing information property of its hazards. - CONTINUED ON NEXT PAGE - Date of compilation: 05/01/2024 Revised: 16/05/2024 Version: 23 (Replaced 22)
Page 4/8
Made with FlippingBook interactive PDF creator