STYCCOBOND F3 According to UK REACH (S.I. 2019/758) Safety data sheet
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES (continued) Vapour density at 20 ºC: Not relevant * Partition coefficient n-octanol/water 20 ºC: Not relevant * Solubility in water at 20 ºC: Not relevant * Solubility properties: Not relevant * Decomposition temperature: Not relevant * Melting point/freezing point: Not relevant * Flammability: Flash Point:
Non Flammable (>60 ºC)
Flammability (solid, gas): Autoignition temperature: Lower flammability limit: Upper flammability limit: Particle characteristics: Median equivalent diameter:
Not relevant *
370 ºC
Not relevant * Not relevant *
Non-applicable
9.2 Other information:
Information with regard to physical hazard classes: Explosive properties:
Not relevant * Not relevant * Not relevant * Not relevant * Not relevant *
Oxidising properties: Corrosive to metals: Heat of combustion:
Aerosols-total percentage (by mass) of flammable components:
Other safety characteristics: Surface tension at 20 ºC:
Not relevant *
Refraction index: Not relevant * *Not relevant due to the nature of the product, not providing information property of its hazards.
SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity: No hazardous reactions are expected because the product is stable under recommended storage conditions. See section 7 from Safety Data Sheet. 10.2 Chemical stability: Chemically stable under the indicated conditions of storage, handling and use. 10.3 Possibility of hazardous reactions: Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected. 10.4 Conditions to avoid: Applicable for handling and storage at room temperature: Shock and friction Contact with air Increase in temperature Sunlight Humidity Not applicable Not applicable Not applicable Not applicable Not applicable 10.5 Incompatible materials: Acids Water Oxidising materials Combustible materials Others Avoid strong acids Not applicable Not applicable Not applicable Avoid alkalis or strong bases 10.6 Hazardous decomposition products: See subsection 10.3, 10.4 and 10.5 to find out the specific decomposition products. Depending on the decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO₂), carbon monoxide and other organic compounds.
- CONTINUED ON NEXT PAGE -
Page 5/8
Date of compilation: 05/01/2024
Revised: 16/05/2024
Version: 23 (Replaced 22)
Made with FlippingBook interactive PDF creator