INSTRUCTIONS FOR SAFE OPERATION
This Instruction Manual must be read and understood by all personnel who use, adjust or maintain the K44 Series Poly Rotors. This Instruction Manual must be supplied and explained to all users. At all times observe Work Health and Safety Regulations and Workcover Regulations.
1. BE SURE tractor drawbar pin is locked securely in place.
2. DO NOT operate unit while people are within 50 metres.
3. KEEP CLEAR of machine when in working & lifted position – AT ALL TIMES.
4. All bolts, nuts & pins MUST be well secured.
5. DO NOT stand on or ride on machine.
6. NEVER get under or on top of machine when it is supported by implement jack
SAFE WORK PROCEDURES
FITTING INSTRUCTIONS FOR K44 POLY-TIPPED HARROWS
A Risk Assessment must be carried out prior to assembly of these Harrows
□ Lower whole machine to ground on flat surface
□ Place rotors in correct sequence behind machine and attach to
□ Position boom in place and bolt to frame of machine with M16 x 100 U-bolts (finger
tight).
□ Lift rotor bow to rear of boom, secure in place with M12 x 65 U-bolt
□ Boom mount position can be varied on bow to allow for variation in boom positions
when attaching to machine.
□ Check for cover (allow approx. 100mm) overlap
□ Do all bolts up, check bolts in first 4 hours of use
Page 4 of 12
Made with FlippingBook - Online Brochure Maker