2925U 2940U Universal Rigid Speedtiller Operator Manual

S P E E D T I L L E R S TA R T - U P T I P S Ⓡ

THIS IS A GUIDE ONLY AND MUST BE READ IN CONJUNCTION WITH INSTRUCTION MANUAL

1) TILT ADJUSTMENT (SETTING TO REDUCE SIDEWAYS TRACKING) • Start with front disc 20mm higher than back discs. • Follow diagram for tilt settings. pg 24 • To adjust turn front adjuster and lock. 2) FRONT LATERAL DISC POSITIONING • Front lateral disc positioning is factory set for standard operating conditions. • If adjustment is needed follow. pg 27

3) SPEED RANGE • 8-15km/hr. (5-9mph) • Greater activity occurs at higher speeds. • Slow down in rough terrain (such as rocky country).

4) HEADLANDS/TURNING • Always raise machine when performing headlands (turning at end of run) etc.. • For 3 point Linkage machines, raise machine with Tractor Linkage Height Adjustment so discs and rollers are not in contact with ground. • For trailing and Powerflex machines, raise machine with wheels so discs and rollers are just out of contact with ground.

5) ROAD TRAVEL SPEED LIMIT • 32kmh (20mph) Maximum

22

2925U-2940U UNIVERSAL SPEEDTILLER

OPERATOR & SAFETY MANUAL

Made with FlippingBook - Online Brochure Maker