2925U 2940U Universal Rigid Speedtiller Operator Manual

Safety Information

TYRE SAFETY & PRESSURES SERVICING PROCEDURES OPERATIONAL SAFETY

Always cage tyres before seating beads.

Never exceed stated pressures when seating beads.

Do not attempt to mount a tyre unless you have the suitable equipment and experienced personnel.

Figure : 3.15 Tyre Safety Warning !

Inflating tyres can be dangerous. Always

stand to the side when inflating.

Failure to comply could result in serious injury or death.

Load ratings of replacement tyres should

meet or exceed weight requirements.

For correct Tyre pressure refer to 1. SPECIFI- CATIONS - Tyre Specification Table. Before mounting wheel to machine, check all hub and rim contact surfaces are undamaged and free of paint, dirt and grease. Lubricate wheel stubs with standard viscosity oil. Tension wheel nuts to the correct specification according to tyre size refer to 1. SPECIFICATIONS - Tyre Specification Table. For field operation: Re-tension after 1st, 5th, then every 50 hrs of operation. For road travel re-tension first 3 miles (5kms), 10 miles (15kms), and thereafter at 25 miles (40kms) intervals.

Figure : 3.16 Warning ! Tyre Pressure.

TYRE PRESSURE MAY VARY DEPENDING ON TYRES USED.

3.13.13

2900 Universal Speedtiller

OPERATOR & SAFETY MANUAL

2925U-2940U Op Book.indb 13

9/03/2023 12:45:54 PM

Made with FlippingBook - Online Brochure Maker