2925U 2940U Universal Rigid Speedtiller Operator Manual

F I E L D O P E R AT I O N

REAR VIEW OF DISC PROFILE

The disc positioning system is used for maximum soil disturbance, reduced ridging and weed control. Adjustment can also be made to compensate for disc wear. ADJUSTMENT PROCEDURE *NB - Be sure machine is tracking in line before attempting to make this adjustment. Pg 24 LATERAL FRONT DISC GANG POSITIONING • Start with factory settings. Pg 26 • Test run at normal operating speed and stop quickly. • Check for ridges of undug soil. Follow ridges into machine and identify which direction to adjust. See diagrams on this page • To remove any ridges, only adjust front sideways in small increments ½” or 12mm. • Re-check in hard soils as Jump Arms tend to flex more. R emember , F ull ground disturbance starts at 2 ½” 60 mm

Figure 27

Adjustable Front Gang

Left

Right

Top Elevation

Soil Throw

Figure 28

Soil Throw

(A)

(B)

(A)

Cross Sectional View Of Soil Distrubance

Move Front Gang Right To Cut Out (A) Left To Cut Out (B)

Figure 26

Figure 29

25

2925U-2940U UNIVERSAL SPEEDTILLER

OPERATOR & SAFETY MANUAL

Made with FlippingBook - Online Brochure Maker