A journey within technology and performance. DID YOU KNOW THAT BLACK LINE IS NOT ONLY ABOUT SURGICAL? Restorative, diagnostic and endodontic instruments make the Black Line Collection wider
SATIN STEEL XTS
HIGH PERFORMANCE COMPOSITE INSTRUMENTS
Advanced technology and innovative design have enabled Hu-Friedy to produce a superior instrument: XTS COMPOSITE INSTRUMENTS . XTS Instruments allow for exceptional non-stick placement of composite materials without discoloring the restoration.
FEATURES & BENEFITS
DISTINCTIVE BLACK FINISH Enhanced contrast between instrument, tooth structure and composite material. The black finish will not flake or discolor the restoration.
UNIQUE SMOOTH, LARGE, LIGHTWEIGHT HANDLE DESIGN Easy clean-up, maximum comfort, reduced hand fatigue and an increased level of control.*
QUALITY CRAFTSMANSHIP / VARIETY OF DESIGNS Satin Steel XTS instruments offer unsurpassed performance and an extensive assortment of designs for all composite placement needs.
*Source: Gerwatowski, L.J., McFall, D.B., Stach, D.: Carpal Tunnel Syndrome; Risk Factors and Preventive Strategies for the Dental Hygienist. Journal of Dental Hygiene, February 1992.
FREEDMAN
POSTERIOR COMPOSITE INSTRUMENTS Instruments specially designed to pre-contour and shape the occlusal surface of the uncured composite.
| TNPCCI
THE DUCKHEAD INSTRUMENT
Duckhead Instrument is used to contour the convexity of the cusp ridge, developing the anatomy in a single motion.
CONTACT FORMING COMPOSITE INSTRUMENT (SMALL) | TNFCIS Oval-shaped paired instrument designed to provide improved contact forming for small Class II restorations.
CONTACT FORMING COMPOSITE INSTRUMENT (LARGE) | TNFCIL Oval-shaped paired instrument designed to provide improved contact forming for large Class II restorations.
GOLDSTEIN
FLEXI-THIN COMPOSITE INSTRUMENTS The Goldstein Flexi-Thin collection also includes mini designs for small and difficult-to-access preparations.
#1 GOLDSTEIN FLEXI-THIN | TNCIGFT1 Small universal style rounded condenser tip and thin, narrow paddle for initial placement and contouring. Application: Class I, II and III restorations.
| TNCIGFT2
#2 GOLDSTEIN FLEXI-THIN
Larger universal style for final placement and contouring. Application: Class I, II and III restorations.
| TNCIGFT3
#3 GOLDSTEIN FLEXI-THIN
Flexible, reversed, flared paddle design for shaping and placement. Application: Class III and IV restorations.
#4 GOLDSTEIN FLEXI-THIN | TNCIGFT4 Very thin, flexible, paired, offset, paddle-shaped blades for placing and shaping material on posterior, mesial, and distal surfaces. Reverse angle is also useful for placing and shaping anterior bonded restorations.
| TNCIGFT5
#5 GOLDSTEIN FLEXI-THIN
Small reverse angle tips make it easy to place fissures, grooves and pits creating the ideal occlusal anatomy in hard-to-reach posterior areas.
| TNCIGFT6
#6 GOLDSTEIN FLEXI-THIN
Large reverse angle tips make it easy to place fissures, grooves and pits creating the ideal occlusal anatomy in hard-to-reach posterior areas.
| TNCIGFTMI1
MINI #1 GOLDSTEIN FLEXI-THIN
AVAILABLE IN MICRO MINI | TNCIPCS
For small pits and fissures, tunnel preps or minor tooth defects on lower anteriors.
| TNCIGFTMI3
MINI #3 GOLDSTEIN FLEXI-THIN
Flexible, reversed small flared paddle design for shaping and placement in small preparations.
| TNCIGFTMI4
MINI #4 GOLDSTEIN FLEXI-THIN
Ideal for placing and shaping material in difficult-to-access mesial and distal posterior restorations.
GOLDFOGEL
FREEHAND COSMETIC CONTOURING INSTRUMENTS
Nine freehand cosmetic contouring instruments designed specifically for anterior and posterior use.
| TNCCIA
#1 GOLDFOGEL
Angle of tip allows easier access for contouring composite material on larger facial surfaces of central incisors.
| TNCCIB
#2 GOLDFOGEL
Straight or angled end can be used for contouring composite material on smaller facial surfaces of central incisors.
| TNCCIC
#3 GOLDFOGEL
Flat side of the blade is used for interproximal contouring on central incisors.
| TNCCID
#4 GOLDFOGEL
Used when working near or at interproximal areas. Straight end compacts composite material, while sharp knife edge cuts composite to avoid bonding to adjacent tooth.
| TNCCIE
#5 GOLDFOGEL
Curved blades for thinning and shaping composite material at the gingival areas.
| TNCCIF
#6 GOLDFOGEL
Curved blades for adding and shaping composite material on desired areas of facial incisors.
| TNCCIG
#7 GOLDFOGEL
Allows formation of marginal ridges along with buccal and lingual embrasures while composite is uncured.
| TNCCIH
#8 GOLDFOGEL
Designed to help attain proper occlusal form, function and improve marginal seal.
| TNCCII
#9 GOLDFOGEL
Aids in forming a properly filled axial box and occlusal portion.
BOGHOSIAN / LADMORE
#1 BOGHOSIAN | TNPFIAB1 A combination of thin, knife-shaped blade with standard angled blade. Knife blade allows controlled, efficient manipulation of composite, even in gingival areas. Application: Class III, IV and V restorations.
| TNPFIAB2
#2 BOGHOSIAN
Used for measuring composite layers and shaping occlusal anatomy.
| TNBBL2
LADMORE #2
Medium and large rounded tips for condensing composite materials.
LADMORE #3 | TNBBL3 Small and medium slightly rounded tips for condensing composite materials.
GENERAL
| TNBBS/M
Hu-Friedy’s XTS instruments provide high-quality options for every step of a restorative procedure. The general XTS instruments include carvers, filling instruments, contouring instruments, pluggers, burnishers and more.
SMALL/MEDIUM
BALL BURNISHER Shape conforms to rounded corners or junctions of cavity surfaces to condense and shape composite against the cavity wall.
| TNBB21B
| TNCFIS/M
#21B DE
SMALL/MEDIUM
BURNISHER Acorn shaped instrument for carving occlusal anatomy in posterior restorations.
CONTACT FORMING Oval-shaped paired instrument designed to provide improved contact forming for small/ medium Class II restorations.
| TNBB27/29
| TNCFIM/L
#27/29 DE
MEDIUM/LARGE
BURNISHER Used to blend material to margin for final contouring, to achieve sculpting of areas like grooves, fissures or pits and to carve occlusal anatomy.
CONTACT FORMING Oval-shaped paired instrument designed to provide improved contact forming for medium/ large Class II restorations.
GENERAL
| TNCFIR/L
| TNCVIPC
CONTOURING
INTERPROXIMAL
INSTRUMENT Used for shaping of inclines, planes or developmental lobes for anterior and posterior restorations. The different angles of curvature on each end provide a buccal and lingual orientation for posterior shaping or a facial and lingual orientation for anterior shaping.
CARVER Extremely thin, flexible blades opposed for easy handling of composite materials and interproximal contouring. Application: Class I, II, IV and V restorations.
MEDIUM PLACING/ | TNCIPCM CONDENSING For small pits and fissures, as well as placement and condensing with limited access.
| TNCVIPCL
LONG
INTERPROXIMAL CARVER Used for placement of the composite increments against the cavity wall or adjacent tooth surface.
| TNCIPCL
| TNPFI8A
LARGE PLACING/
#8A DE
CONDENSING For final placement in Class I and II restorations. The larger, round ball end is used for condensing and shaping in Class I and II restorations and on lingual surfaces of anterior teeth.
Used for gingival retraction, as well as to place and sculpt facial aspects.
| TNPFIA6
0T TANNER | TNPLG0T Rhomboid-shaped plugger for use with condensable composite material in posterior restorations.
#A6 DE
Large, thin blades are opposed for adaptability to any situation, including veneers where broad contouring or carving strokes are needed. Application: Class II, III, IV and V restorations.
| TNPFIG4/5
| TNPLG5A
#4/5 GREGG DE
#5A SMALL,
ROUND #5A Small, round, inverted cone plugger for use with condensable composite material in posterior restorations.
Off-angled blades allow easy adaptability to mesial and distal surfaces of posterior teeth, providing increased interproximal access and better visibility of the working area. Application: Class II and V restorations.
| TNPFIW3
| TNPLGH3
#W3 DE PLASTIC
#3 HOLLENBACK
FILLING INSTRUMENT Combination of medium-sized blade with small condenser tip for universal adaptability. Ideal for placement, layering and general contouring. Application: Class I, II, III, IV and V restorations.
RECTANGULAR Rectangular-shaped plugger for use with condensable
composite material in posterior restorations.
CONTACT HU-FRIEDY FOR MORE INFORMATION ON MICRO MINI INSTRUMENTS.
| TNCIPCS
MICRO MINI #1 GOLDSTEIN FLEXI-THIN Micro-Mini for extremely small pits and fissures.
KIT LISTS
| TNANTKIT
| TNPOSKIT
ANTERIOR KIT
POSTERIOR KIT
Five specially designed Anterior Satin Steel XTS Composite Instruments to be used for placing, condensing, and carving composite materials.
Five Posterior Satin Steel XTS Composite Instruments specially designed for Class I & II restorations.
#3 Goldstein Flexi-Thin
TNCIGFT3
0T Tanner
TNPLG0T
Micro Mini #1 Goldstein Flexi-Thin
TNCIPCS
#3 Hollenback Rectangular
TNPLGH3
Medium Placing/Condensing
TNCIPCM
#5A Small, Round
TNPLG5A
Large Placing/Condensing
TNCIPCL
Small/Medium Contact Forming
TNCFIS/M
Mini #1 Goldstein Flexi-Thin
TNCIGFTMI1
Medium/Large Contact Forming
TNCFIM/L
For more information about Hu-Friedy’s Total Solutions visit hu-friedy.eu
Manufacturer: Hu-Friedy Mfg. Co., LLC | 3232 N. Rockwell Street | Chicago, IL 60618 | USA Customer Care Department: Free Phone 00800 48 37 43 39 | Free Fax 00800 48 37 43 40 Website: Hu-Friedy.eu
©2015 Hu-Friedy Mfg. Co., LLC. All rights reserved. HF-GB-XTS/1015
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12Made with FlippingBook Annual report