Project Profile_Morton Industrial Site_MWS_10-24-18

PROJECT PROFILE | MORTON, WA Industrial Site’s Sustainable Stormwater Solution Modular Wetlands® System

A Forterra Company

Mount Rainier Port of Tacoma, Washington

Photo Credit: George Cole

Introduction Washington is a web of rivers, tributaries, wetlands, and forests which support a seemingly endless array of wildlife species, and also the economy and population. As in any growing state, commerce, industry, and development is just as essential as the state’s natural resources. Morton, Washington is like many rural outcroppings that are tied to the economies of Seattle and Tacoma. This small town is nestled at the foothills of great Mount Rainier, surrounded by mature woodlands and wetlands adjacent to Lake Creek (which feeds the grand Tilton River). A 10-acre new construction and industrial development on the outskirts of town is home to a medical device recycling center, Stericycle. New industrial sites surrounded by Washington’s pure natural resources can be intriguing models of sustainable Low Impact Development, given the proper proven solutions. They show us how engineers and developers can successfully design stormwater systems to both achieve short and long term economic goals and comply with the Washington State Department of Ecology’s regulations and protections. Situation Stericycle’s new industrial recycling center is a 38,000-square foot property “serv(ing) thousands of customers throughout Washington,” 1 providing waste disposal solutions and hosting an almost constant volume of trucking

and delivery traffic from Olympia, Tacoma, Puyallup, Centralia, and Vancouver. Industrial related trucking generates obvious Pollutants of Concern (POCs) that will continuously collect on the newly paved parking lot and large metal-roofed building. Upon heavy rains and the “first flush” of stormwater, these pollutants typically run off and enter the environment untreated. According to the Washington Department of Ecology, “Stormwater can pick up pollution from factories and businesses. Those contaminants are carried into waterways and harm fish and other aquatic life. 2 Stormwater runoff is the leading threat to Washington’s urban waters, streambeds, banks, and habitats.” 3


398 Via El Centro Oceanside CA 92058 | 855.566.3938 | |

A Forterra Company

Figure A: Google Earth imagery of Stericycle industrial site

Jeff Pierce, a leading local stormwater expert for Bio Clean Environmental adds, “The Engineer of Record for this site needed to do the right thing for his client, the wetlands, and nature that surround the property, but big bioswales and non-proprietary BMPs are costly and often ineffective.” Challenge Keeping construction and development costs down is always a top concern, but there was an added challenge of introducing enhanced stormwater treatment to comply with the Washington State Department of Ecology’s regulations to “reduce stormwater pollution leaving their site.” 4 This impervious land mass will generate stormwater runoff filled with POCs – Dissolved Metals, Total Suspended Solids (TSS), Hydrocarbons, and Nitrogen – producing high treatment flow rates. As stated by Washington’s DOE, “Emerging stormwater treatment technologies (TAPE) are reviewed and certified by the Washington State Technology Assessment Protocol – Ecology. Better known as the TAPE program.” 5

Bio Clean’s Modular Wetlands® System Linear is approved by the Washington State Department of Ecology for General Use Level Designation (GULD) for Basic (TSS), Enhanced (Heavy Metals –Zinc and Copper), and Total Phosphorous treatment regiments. This designation allows the Modular Wetlands® System to be specified as a stand-alone BMP to mitigate these pollutants. “This biofiltration system is the most reliable stormwater device under these conditions, and the Modular Wetlands® System is economical, reliable, and approved by Washington State DOE,” according to Jeff Pierce. He continues, “High treatment flow rates, in many systems, equate to high maintenance costs, but the Modular Wetlands® is the only biofilter utilizing horizontal flow, allowing for multiple stages of treatment – compartmentalizing trapped pollutants. Our client will enjoy the lower excavation and construction costs, but also long-term low maintenance benefits.”

398 Via El Centro Oceanside CA 92058 | 855.566.3938 | |

PROJECT PROFILE | MORTON, WA Industrial Site’s Sustainable Stormwater Solution Modular Wetlands® System

Solution Designed for easy maintenance access, the first stage of the system is the pretreatment stage. Here, pollutants that cause clogging (if they migrate to the biofiltration chamber) are almost completely collected in convenient media filter cartridges, thus inoculating the main biofiltration chamber from heavy loads and making regular maintenance evaluations and cartridge cleaning quick and easy.

Horizontal flow also allows for internal high-flow bypass in a Side-by-Side Orientation design, placing the pretreatment and discharge chambers adjacent to one another [As seen in Figure B]. During certain rain events, heavy downpour and water volumes can increase above the norm, causing some other systems (typical downward flow systems) to fail as they get overwhelmed – releasing concentrations of collected pollutants into downstream woodlands, lakes, and rivers. However, the Modular Wetlands® System has the unique ability to allow those flows to bypass the main biofiltration chamber internally, an essential and highly valuable feature in heavy-rain states like Washington. For this site and the City of Morton, pollutants already successfully collected by the stormwater biofiltration system will remain trapped and secure. Attempting to mitigate these challenges with typical bioswales can be costly. Basic non-proprietary bioretention systems typically need 1,795 sq. ft. per impervious acre (in this case a 17,950 square feet of space), but the Modular Wetlands® System takes up a mere 189 square feet (MWS-L 8-20 Curb Inlet Application) at a depth of 6.5 feet, designed to treat 0.4794 cubic feet per second of stormwater.

According to Washington State’s Department of Ecology, “Wetlands are nature’s water filters, sponges, and nurseries… wetlands cover approximately 938,000 acres in Washington, about 2 percent of the state’s total land area. Since the 1780s, Washington has lost 31 percent of its wetland areas, from 1.35 million acres to 938,000 acres. Wetlands are critical to the overall health of watersheds.” 6 Upon design, Bio Clean’s mission was to combine nature with technology in a versatile and advanced stormwater biofiltration system. The system continues to prove itself and has been widely used in Washington, with 100s of installations. No other stormwater innovation has embraced the spirit of natural water filtration quite like the Modular Wetlands® System, sustainably consolidating and reproducing the power of wild wetlands for the state of Washington and the world. REFERENCES Figure A: Google Earth Website Image: Figure B: Rendering of Bio Clean Environmental’s Modular Wetlands® Systems Side-by-Side Orientation 1. Stericycle.comWebsite: 2. Department of Ecology, State of Washington Website: general-permits/Industrial-stormwater-permit 3. Department of Ecology, State of Washington Website: Stormwater 4. Stericycle.comWebsite: 5. Department of Ecology, State of Washington Website: Stormwater-permittee-guidance-resources/Emerging-stormwater-treatment-technologies 6. Department of Ecology, State of Washington Website:

398 Via El Centro Oceanside CA 92058 | 855.566.3938 | |

PROJECT PROFILE | MORTON, WA Industrial Site’s Sustainable Stormwater Solution Modular Wetlands® System

A Forterra Company

CONTACT INFORMATION Regional Stormwater Consultants for the Pacific Northwest

Jeff Pierce Seattle, Northern Washington, and Idaho | Phone: (253) 249-6512 | Email:

Matthew Davis Tacoma, Southern Washington, and Oregon | Phone: (206) 595-6906 | Email:


With or without plants (open planter or sealed), the system maintains superior performance in any design configuration.

WA TAPE GULD Approval Without Plants

The Modular Wetlands ® System Linear

Piping into the system opens up numerous configuration and design options, like downstream use or diverting for retrofits.

Can Accept Existing Pipe Below Surface

The easily accessible pretreatment chamber traps and isolates trash, sediments, and hydrocarbons. A unique feature, proven to keep maintenance frequencies & costs at industry-leading lows.

Works Months Without Requiring Maintenance

The Side-By-Side Orientation option allows abnormal high flows to bypass from pre-treatment directly to the discharge chamber.

Can Accommodate High Flow Internal Bypass

Space-saving design provides low excavation and installation costs, plus there is no dangerous depressed planter bed.

Design Flexibility & Safety

Side-by-Side Orientation

398 Via El Centro Oceanside CA 92058 | 855.566.3938 | |

Page 1 Page 2 Page 3 Page 4

Made with FlippingBook Learn more on our blog